Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Help for engine swap
31-01-2023, 14:00 PM,
Post: #1
|
|||
|
|||
Help for engine swap
Hello friends, i need some help and advice
Passat b6 2.0 BMR 170ps I want to swap just engine from passat 2.0 BKP 140ps to passat that was orginaly with BMR engine, Can it be swapped with just engine without ecu and other things? Both has siemens ECU Will it work? Thank you |
|||
31-01-2023, 14:24 PM,
Post: #2
|
|||
|
|||
RE: Help for engine swap
Hi
It should work only replacing engine However I think if you swap engine you must use original injector and turbo from original BKP engine otherwise must adjust ECU If engine block and head is the same no problem Chip Diesel
Peugeot 206 2.0 HDI 90HP @3XX HP LOADING GTB2060VKLR billet Autotuner/MPPS/ECUDecoder/ECMTitanium ORI |
|||
31-01-2023, 14:37 PM,
Post: #3
|
|||
|
|||
RE: Help for engine swap
(31-01-2023, 14:24 PM)zapdus Wrote: HiBKP engine is complete, with injectors, but ecu and turbo is from BMR engine BKP has 140ps BMR has 170ps |
|||
01-02-2023, 16:41 PM,
Post: #4
|
|||
|
|||
RE: Help for engine swap
(31-01-2023, 14:37 PM)papaosman Wrote:(31-01-2023, 14:24 PM)zapdus Wrote: HiBKP engine is complete, with injectors, but ecu and turbo is from BMR engine I dont know how to adjust injectors on that ECU Is car working that way or still didnt start? Chip Diesel
Peugeot 206 2.0 HDI 90HP @3XX HP LOADING GTB2060VKLR billet Autotuner/MPPS/ECUDecoder/ECMTitanium ORI |
|||
02-02-2023, 11:07 AM,
Post: #5
|
|||
|
|||
RE: Help for engine swap
flash ecu to proper soft , if both use this same HW
|
|||
03-02-2023, 10:37 AM,
(This post was last modified: 03-02-2023, 10:52 AM by papaosman.)
Post: #6
|
|||
|
|||
RE: Help for engine swap
(01-02-2023, 16:41 PM)zapdus Wrote:(31-01-2023, 14:37 PM)papaosman Wrote:(31-01-2023, 14:24 PM)zapdus Wrote: HiBKP engine is complete, with injectors, but ecu and turbo is from BMR engine I have not adjusted anything, the ECU and Turbo are from BMR, the car starts, but the turbo does not activate, and the ecu does not register any errors when I remove any connection, for example, the air mass sensor or any other (02-02-2023, 11:07 AM)spacewalker Wrote: flash ecu to proper soft , if both use this same HW This is ECU from BMR (170ps) that is on the car I dont have ECU from BKP (140ps) engine, I think HW is 03G 906 018 CK for BKP but im not sure, What you think? Do i have to change ECU, and if i change ECU then i need to change Turbo too |
|||
04-02-2023, 09:57 AM,
Post: #7
|
|||
|
|||
RE: Help for engine swap
I changed the ECU from 140ps, i put 03G 906 018 A, car starts and runs, now it registers errors when i disconect the air mass sensor or any other sensor, but Turbo is not working, not activating
now if i change Turbo, i will need to change engine wiring also, im i right? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content