[Mwahab]

Hey
I didn’t imagine changing power class in CAS2 will be that hard.
Its not possible to change power class in it via NCS, i tried Flashing with all CAS2 ZB numbers in Winkfp in comfort mode, I didn’t try to force other 2 ZB numbers.
Hexprog doesn’t support eeprom dump editor, as well as VVDI.
I want power class and frequency location in CAS2 eeprom please.
Or is there an editor for CAS2?
I am sure they are in Eeprom, i wrote dump of another CAS2, power class and frequency changed successfully, but I couldn’t understand which is which. Thanks for your time.

MSV70 has working hours reset, but i don’t want to change the power class in its dump, so car can be flashed normally when it go to someone else.

[____ANGEL___]

Hey
I didn’t imagine changing power class in CAS2 will be that hard.
Its not possible to change power class in it via NCS, i tried Flashing with all CAS2 ZB numbers in Winkfp in comfort mode, I didn’t try to force other 2 ZB numbers.
Hexprog doesn’t support eeprom dump editor, as well as VVDI.
I want power class and frequency location in CAS2 eeprom please.
Or is there an editor for CAS2?
I am sure they are in Eeprom, i wrote dump of another CAS2, power class and frequency changed successfully, but I couldn’t understand which is which. Thanks for your time.

MSV70 has working hours reset, but i don’t want to change the power class in its dump, so car can be flashed normally when it go to someone else.

send eep dumps

[johann74270]

Hi
Did you try to change the production code in VO/FA before coding?

[Mwahab]

Hey
I didn’t imagine changing power class in CAS2 will be that hard.
Its not possible to change power class in it via NCS, i tried Flashing with all CAS2 ZB numbers in Winkfp in comfort mode, I didn’t try to force other 2 ZB numbers.
Hexprog doesn’t support eeprom dump editor, as well as VVDI.
I want power class and frequency location in CAS2 eeprom please.
Or is there an editor for CAS2?
I am sure they are in Eeprom, i wrote dump of another CAS2, power class and frequency changed successfully, but I couldn’t understand which is which. Thanks for your time.

MSV70 has working hours reset, but i don’t want to change the power class in its dump, so car can be flashed normally when it go to someone else.

send eep dumps

[____ANGEL___]

Hey
I didn’t imagine changing power class in CAS2 will be that hard.
Its not possible to change power class in it via NCS, i tried Flashing with all CAS2 ZB numbers in Winkfp in comfort mode, I didn’t try to force other 2 ZB numbers.
Hexprog doesn’t support eeprom dump editor, as well as VVDI.
I want power class and frequency location in CAS2 eeprom please.
Or is there an editor for CAS2?
I am sure they are in Eeprom, i wrote dump of another CAS2, power class and frequency changed successfully, but I couldn’t understand which is which. Thanks for your time.

MSV70 has working hours reset, but i don’t want to change the power class in its dump, so car can be flashed normally when it go to someone else.

send eep dumps

powerclass is 00, 0xB352 and chk 0xB357
C2/9A =pc00
D2/AA =pc01
E2/BA =pc02
used brain.exe and HXD
values are valid only for this dump

[Mwahab]

Hey
I didn’t imagine changing power class in CAS2 will be that hard.
Its not possible to change power class in it via NCS, i tried Flashing with all CAS2 ZB numbers in Winkfp in comfort mode, I didn’t try to force other 2 ZB numbers.
Hexprog doesn’t support eeprom dump editor, as well as VVDI.
I want power class and frequency location in CAS2 eeprom please.
Or is there an editor for CAS2?
I am sure they are in Eeprom, i wrote dump of another CAS2, power class and frequency changed successfully, but I couldn’t understand which is which. Thanks for your time.

MSV70 has working hours reset, but i don’t want to change the power class in its dump, so car can be flashed normally when it go to someone else.

send eep dumps

powerclass is 00, 0xB352 and chk 0xB357
C2/9A =pc00
D2/AA =pc01
E2/BA =pc02
used brain.exe and HXD

Sorry for curiosity.
How did you knew its location? You had previous experience? Or when you just opened the dump you realized where is it?

[____ANGEL___]

Hey
I didn’t imagine changing power class in CAS2 will be that hard.
Its not possible to change power class in it via NCS, i tried Flashing with all CAS2 ZB numbers in Winkfp in comfort mode, I didn’t try to force other 2 ZB numbers.
Hexprog doesn’t support eeprom dump editor, as well as VVDI.
I want power class and frequency location in CAS2 eeprom please.
Or is there an editor for CAS2?
I am sure they are in Eeprom, i wrote dump of another CAS2, power class and frequency changed successfully, but I couldn’t understand which is which. Thanks for your time.

MSV70 has working hours reset, but i don’t want to change the power class in its dump, so car can be flashed normally when it go to someone else.

send eep dumps

powerclass is 00, 0xB352 and chk 0xB357
C2/9A =pc00
D2/AA =pc01
E2/BA =pc02
used brain.exe and HXD

Sorry for curiosity.
How did you knew its location? You had previous experience? Or when you just opened the dump you realized where is it?

it's the same logic location of cas3, we have a lot of dumps here in volavka's thread cas collection, i've studied many dumps and get this, also before forum crash, i've started a thread wich explain all of power class and hours, but is lost now.

[Mwahab]

send eep dumps

powerclass is 00, 0xB352 and chk 0xB357
C2/9A =pc00
D2/AA =pc01
E2/BA =pc02
used brain.exe and HXD

Sorry for curiosity.
How did you knew its location? You had previous experience? Or when you just opened the dump you realized where is it?

it's the same logic location of cas3, we have a lot of dumps here in volavka's thread cas collection, i've studied many dumps and get this, also before forum crash, i've started a thread wich explain all of power class and hours, but is lost now.

Thats great, thanks man for your information, it really helps alot.
I will start working to understand the “LOGIC” behind that, i always depend on software to edit dumps and such, i will try to understand manually. Thanks again