[abbate22]

Hello all users, I need advice to clone the BCM of my Fiat Punto EVO, the body Delphi BSI 18690940 has the NEC 70F3379 and 93C86. I bought the same one with the same fiat code and I would like advice on reading and writing both eeproms, perhaps which programmer to use and its procedure, obviously you recommend a cheaper one, I have a UPA 1.3 USB, but I don't know if it can work, also because I don't have the scripts suitable for mcu 70f3379. Can anyone advise me? in jtag or in OBD. Thank you

[bmw320d]

You can read and write bcm with i/o terminal, or you can desolder mcu and e2p and swap from original bcm to donor bcm, or you can to make a new transponder key from donor bcm and program new key to car

[abbate22]

Thanks for the reply
in case I want to use a programmer without unsoldering the mcu and ep2 which one could be valid, I have seen many expensive models on alixpress, is there any cheaper functional terminal?