[rehatflogs]

Hi all 

Have upgraded a can gateway module for a Audi A3 8V
5Q0907530M --> 3Q0907530AC
This is to support MFSW


Both Lear High gateways

Upgraded correctly, copied all coding and adaptations, cleared CP etc.
However still get gёиёяатоя faults and  battery charging warnings.

Anyone come across this before please?

Im thinking the 3Q0 has the wrong parameters on it to work with an A3

Anyone have different parameter files i could try for this gateway?

Thanks

[Versus]

Any error in Gateway?

[rehatflogs]

No errors and then will get gёиёяатоя fault stored in GW.
Cannot communicate.

So im thinking must be parameters and could try alternative ones?
Cannot download from ODIS Geko as the GW is not meant for this VIN.
No access to VCP either

[Versus]

gёиёяатоя connected to gateway by LIN. Gateway working?

[rehatflogs]

Yes GW Working. No other faults stored. Only gёиёяатоя fault.

No gёиёяатоя fault using ori 5Q0 GW.

Must be something in parameters which is different in later Facelift cars which is causing gёиёяатоя not to talk to GW.

---

Does anyone have the ori datatset for 5Q0907530M ??

Maybe I can edit the dataset 3Q0 and use the 5Q0 parameters stored at:
START_ADDRESS="0x0001C80 (7296 = ODIS Energie Managment / gёиёяатоя

Then do CRC checksum to repackage parameter file.

[jokir]

In the original GW there is a dataset for FPA, MKE and EASS, in the new GW from index AA there is a dataset for FPA, MKE, EASS and NVEM for alternator size. You need a GW with index Q, it does not solve the alternator.

[Mex165]

Yes, done this and flashing to Q is the only solution.

[rehatflogs]

Yes, done this and flashing to Q is the only solution.

Flashing the new 3Q0 to version Q?

Or you mean the old 5Q0 to version Q?

[jokir]

New 3Q0 version Q.

[rehatflogs]

Understood, thanks for the help !