[AROUNDLOCKS]

hi to all
i have 2012 fiesta 1.2
i believe it has abs module fault.
i would like to know if i can take data from old module to new module with ids without having to do a pats relearn for keys .
i don't generally use ids.
any help appreciated

aroundlocks

[mecadriano]

If you open the part you can change eprom, immo data is there.but I've seen them exchange with ids of line, but I don't know the procedure, I believe it's in the module and programming, replace abs, it must read the data from the old one and launch it in the new one, follow the procedure.

[AROUNDLOCKS]

hi [b]mecadriano[/b]
yes i thought about i thought about that way but ive never looked inside one and wouldn't know if data in eeprom or mcu/also how many eeproms in module and which to remove.
if i can do with ids offline without pats relearn its not a problem.
neither is removing eeprom if it can be done that way.
i just need to know either way.
thank you for replying all help is welcome


arounlocks

[fraserauto]

hi [b]mecadriano[/b]
yes i thought about i thought about that way but ive never looked inside one and wouldn't know if data in eeprom or mcu/also how many eeproms in module and which to remove.
if i can do with ids offline without pats relearn its not a problem.
neither is removing eeprom if it can be done that way.
i just need to know either way.
thank you for replying all help is welcome


arounlocks

If use 2nd hand ABS will need to code to immo with IDS

[AROUNDLOCKS]

If use 2nd hand ABS will need to code to immo with IDS

hi is it possible to open abs module and is immo data in the eeprom .
if it is can i program abs on car so asbuilt data the same and then swap eeprom for the immobilizer.

aroundlocks

[fraserauto]

If use 2nd hand ABS will need to code to immo with IDS

hi is it possible to open abs module and is immo data in the eeprom .
if it is can i program abs on car so asbuilt data the same and then swap eeprom for the immobilizer.

aroundlocks

I don't know how to do that only use factory tools

[AROUNDLOCKS]

If use 2nd hand ABS will need to code to immo with IDS

hi is it possible to open abs module and is immo data in the eeprom .
if it is can i program abs on car so asbuilt data the same and then swap eeprom for the immobilizer.

aroundlocks

I don't know how to do that only use factory tools

if module is faulty and needs changing and a new one programming i think it will need 2 keys to relearn pats so i have to make a new key as only 1 key for the car
and will also need incode for the immo and then program new module to car.
i shall remove and have a look inside of module and see if it has internal fault as it needs changing anyway after saving asbuilt data as a backup/
i shall keep you updated on my findings and outcome and thank you for your knowledge

aroundlocks