Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

PASSTHRU for RHEINGOLD
30-05-2015, 15:24 PM, (This post was last modified: 30-05-2015, 15:31 PM by misterrob.)
Post: #1
XZBMW  PASSTHRU for RHEINGOLD
Here is Passthru for Rheingold BMW !


Attached Files
bmwptt_2.1.0.0.rar
File Type: .rar
Downloaded: 747 times
Size: 912.19 KB

Reputation: +4 - Ducka [+1] , paino [+1] , ivkera82 [+1] , rabihfiras [+1]
Quote this message in a reply
[+] 55 users say Thank You to misterrob for this post
31-05-2015, 05:19 AM,
Post: #2
RE: PASSTHRU for RHEINGOLD
What is it . what it can do?

it is k+DCAN work?

Can you upload a video? Beat all description
Quote this message in a reply
31-05-2015, 05:43 AM,
Post: #3
RE: PASSTHRU for RHEINGOLD
HI ALL MEMBER FOR AVDI COMMANDER/Bosch OWNERS YOU CAN SCAN BMW CARS USING AVDI TOOL/ Bosch AS PASSTHRU DEVISE WORKING WITH Rheingold SYSTEM


1. INSTALL Rheingold SYSTEM AND ITS REQUIREMENT
2. INSTALL INPA SOFTWARE (BMW Standard Tools 2.12) SET PORT FOR USB NUMBER 9
3. INSTALL AVDI COMMON SETUP AND PASSTHRU SETUP/Bosch PASSTHRU
4. INSTALL pttbmw_2.1.0.0 (TO CONNECT AVDI AS PASSTHRU DEVICE )


NOW AFTER INSTALAION COMPLETE DO SOME CONFIGURATION

OPEN START>ALL PROGRAMS>BMWPASSTHRUD2.1.0.0>PASSTHRUD CONFIGURATION.......SELECT YOUR AVDI PT/Bosch PT AND CHECK IN K-LINE BOX AND LAUNCH CONFIG.TOOL

OPEN PROGRAM FILE>BMW AG> PASSTHRUD> TAKE COPY FOR ALL FILES EXCEPT EDIBAS AND PAST IT IN C:\EDIABAS\BIN\ REPLACE ALL FILES WITH SAME NAME .
YOU NEED Ediabas-Konfigurator TO CHANGE FROM STANDARD OBD TO PASSTHRUD JUST OPEN THE LIST AND SELECT PASSTHRUD AND GO ON

NOW AVDI TOOL /Bosch PASSTHRU /READY TO WORK WITH INPA ,NCEXPERT AND WINKFP
START Rheingold SYSTEM AND ACTIVAT IT AND GO TO SITTING ICON SELET VCI CONFIG IN THE LEFT SIDE (INTERFACE TYPE) TAP ON EDIABAS STANDARD SETTING AND END WITH OK

NOW ALL DONE
AND HOPE THIS WILL BE HELPFUL [/quote][/code]
Regards Keko
Reputation: +1 - Ducka [+1]
Quote this message in a reply
[+] 34 users say Thank You to keko for this post
31-05-2015, 05:44 AM,
Post: #4
RE: PASSTHRU for RHEINGOLD
What is passthru?
Quote this message in a reply
31-05-2015, 05:54 AM,
Post: #5
RE: PASSTHRU for RHEINGOLD
(31-05-2015, 05:44 AM)yunnowho Wrote:  What is passthru?

Info neuen standard diagnosis
detail inffo :http://de-ww.bosch-automotive.com/de/ww/search_3/search?p_auth=Tr2MQCST&p_p_auth=9WN03ejo&p_p_id=boschsearchportlet_WAR__boschsearchportlet&p_p_lifecycle=1&p_p_state=normal&p_p_mode=view&q=passthru&lang=de&num=10&scenario=1

http://www.abrites.com/products/sae-j253...hru-driver
regards Keko
Quote this message in a reply
31-05-2015, 13:59 PM,
Post: #6
RE: PASSTHRU for RHEINGOLD
(31-05-2015, 05:43 AM)keko Wrote:  HI ALL MEMBER FOR AVDI COMMANDER/Bosch OWNERS YOU CAN SCAN BMW CARS USING AVDI TOOL/ Bosch AS PASSTHRU DEVISE WORKING WITH Rheingold SYSTEM


1. INSTALL Rheingold SYSTEM AND ITS REQUIREMENT
2. INSTALL INPA SOFTWARE (BMW Standard Tools 2.12) SET PORT FOR USB NUMBER 9
3. INSTALL AVDI COMMON SETUP AND PASSTHRU SETUP/Bosch PASSTHRU
4. INSTALL pttbmw_2.1.0.0 (TO CONNECT AVDI AS PASSTHRU DEVICE )


NOW AFTER INSTALAION COMPLETE DO SOME CONFIGURATION

OPEN START>ALL PROGRAMS>BMWPASSTHRUD2.1.0.0>PASSTHRUD CONFIGURATION.......SELECT YOUR AVDI PT/Bosch PT AND CHECK IN K-LINE BOX AND LAUNCH CONFIG.TOOL

OPEN PROGRAM FILE>BMW AG> PASSTHRUD> TAKE COPY FOR ALL FILES EXCEPT EDIBAS AND PAST IT IN C:\EDIABAS\BIN\ REPLACE ALL FILES WITH SAME NAME .
YOU NEED Ediabas-Konfigurator TO CHANGE FROM STANDARD OBD TO PASSTHRUD JUST OPEN THE LIST AND SELECT PASSTHRUD AND GO ON

NOW AVDI TOOL /Bosch PASSTHRU /READY TO WORK WITH INPA ,NCEXPERT AND WINKFP
START Rheingold SYSTEM AND ACTIVAT IT AND GO TO SITTING ICON SELET VCI CONFIG IN THE LEFT SIDE (INTERFACE TYPE) TAP ON EDIABAS STANDARD SETTING AND END WITH OK

NOW ALL DONE
AND HOPE THIS WILL BE HELPFUL
[/code]
Regards Keko
[/quote]

Just what i was looking for. thanks for your help
Quote this message in a reply
31-05-2015, 14:21 PM,
Post: #7
RE: PASSTHRU for RHEINGOLD
(31-05-2015, 05:43 AM)keko Wrote:  HI ALL MEMBER FOR AVDI COMMANDER/Bosch OWNERS YOU CAN SCAN BMW CARS USING AVDI TOOL/ Bosch AS PASSTHRU DEVISE WORKING WITH Rheingold SYSTEM


1. INSTALL Rheingold SYSTEM AND ITS REQUIREMENT
2. INSTALL INPA SOFTWARE (BMW Standard Tools 2.12) SET PORT FOR USB NUMBER 9
3. INSTALL AVDI COMMON SETUP AND PASSTHRU SETUP/Bosch PASSTHRU
4. INSTALL pttbmw_2.1.0.0 (TO CONNECT AVDI AS PASSTHRU DEVICE )


NOW AFTER INSTALAION COMPLETE DO SOME CONFIGURATION

OPEN START>ALL PROGRAMS>BMWPASSTHRUD2.1.0.0>PASSTHRUD CONFIGURATION.......SELECT YOUR AVDI PT/Bosch PT AND CHECK IN K-LINE BOX AND LAUNCH CONFIG.TOOL

OPEN PROGRAM FILE>BMW AG> PASSTHRUD> TAKE COPY FOR ALL FILES EXCEPT EDIBAS AND PAST IT IN C:\EDIABAS\BIN\ REPLACE ALL FILES WITH SAME NAME .
YOU NEED Ediabas-Konfigurator TO CHANGE FROM STANDARD OBD TO PASSTHRUD JUST OPEN THE LIST AND SELECT PASSTHRUD AND GO ON

NOW AVDI TOOL /Bosch PASSTHRU /READY TO WORK WITH INPA ,NCEXPERT AND WINKFP
START Rheingold SYSTEM AND ACTIVAT IT AND GO TO SITTING ICON SELET VCI CONFIG IN THE LEFT SIDE (INTERFACE TYPE) TAP ON EDIABAS STANDARD SETTING AND END WITH OK

NOW ALL DONE
AND HOPE THIS WILL BE HELPFUL
[/code]
Regards Keko
[/quote]

Thanks Kenko for sharing this amazing solution. Appreciated
Quote this message in a reply
23-06-2018, 19:27 PM,
Post: #8
RE: PASSTHRU for RHEINGOLD
Hey guys, sorry for kinda ressurecting this old thread, but maybe some one can help me with my problem, i installed rheingold ista, and used this tutorial to set my j2534 tool to use with ista, but it only works with ista D, and not with ista P, ista P doesnt found my interface, its just dont show up in the interfaces section for ista p, and if someone know a way to make my j2534 interface work with ista P i will be really thankful, in ista d it works perfect, only in ista p it doesnt work, BTW, my interface is a bosch KTS590, it works with ista d and other OEM softwares, so i think its not my interface the problem, but maybe some configuration.

thanks in advance.
Quote this message in a reply
28-08-2018, 20:44 PM,
Post: #9
XZBMW  RE: PASSTHRU for RHEINGOLD
(23-06-2018, 19:27 PM)Ducka Wrote:  Hey guys, sorry for kinda ressurecting this old thread, but maybe some one can help me with my problem, i installed rheingold ista, and used this tutorial to set my j2534 tool to use with ista, but it only works with ista D, and not with ista P, ista P doesnt found my interface, its just dont show up in the interfaces section for ista p, and if someone know a way to make my j2534 interface work with ista P i will be really thankful, in ista d it works perfect, only in ista p it doesnt work, BTW, my interface is a bosch KTS590, it works with ista d and other OEM softwares, so i think its not my interface the problem, but maybe some configuration.

thanks in advance.

anyone???? any ideas??? I really appreciate some help
Quote this message in a reply
29-08-2018, 11:37 AM,
Post: #10
RE: PASSTHRU for RHEINGOLD
For ISTA-P I think You need this : Loader
Quote this message in a reply
[+] 2 users say Thank You to Hoborg for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 132 26-03-2024, 12:09 PM
Last Post: hlip
  Online ISTA Passthru zippywork 9 1,243 13-07-2023, 11:19 AM
Last Post: zippywork
  Ista passthru sqlitedbs Perryking 4 501 17-04-2023, 19:52 PM
Last Post: Perryking
XZBMW BMW Rheingold 3.47.10 cr0x89 2 611 20-02-2023, 17:22 PM
Last Post: cr0x89
XZBMW Rheingold 4.13.14 Standalone / SDP 4.13.11 / ISTA-P 3.65.1.002 spider80 165 56,998 23-12-2022, 15:27 PM
Last Post: PsevDo
XZBMW ISTA Passthru set-up and EDIABAS ports for SM2 diagso 1 1,037 20-11-2022, 14:04 PM
Last Post: diagso
  Rheingold get error while programming -> "faulty icom -car connection -> programming blacktoy 8 1,243 11-11-2022, 18:51 PM
Last Post: blacktoy
XZBMW Ista-P passthru rs@chip 8 3,466 02-11-2022, 12:35 PM
Last Post: walczaklu
XZBMW BMW Passthru PTD driver PassThruD 3.0.11.86 Fahim 0 1,327 28-07-2022, 14:25 PM
Last Post: Fahim
  BMW motorbikes and Rheingold ISTA 4.32.2x blacktoy 2 525 25-04-2022, 11:46 AM
Last Post: blacktoy

Forum Jump:


Users browsing this thread:
3 Guest(s)

Return to TopReturn to Content