[donjuan020]

Hello. I have an HW3.2 device that I need to repair. This device has lost communication after licensing. I wrote EMMC to this device from a device running HW3.2, but no communication came. I read and wrote V850 from the device running HW3.2, but there was no communication. I tried reading and writing GL as a last resort. But I didn't have a solid GL backup of HW3.2. I wrote the HW 4.1 GL backup. Now comes the communication. But right now I can't flash with esys. Do you have an opinion on this?

[RuleNormaliai]

it fails on 271A swfl?

[dasi]

it fails on 271A swfl?

fails on btld as in LOG

[donjuan020]

it fails on 271A swfl?

problem is btld. It throws an error before starting to write swfl.

[gfriedrichi]

it fails on 271A swfl?

problem is btld. It throws an error before starting to write swfl.

Could be damaged HD ?
Are you flashing with your or with donator FA ?

[maaii11]

V850 fail, you can swap a power board to test or use vvid to write v850.

[donjuan020]

it fails on 271A swfl?

problem is btld. It throws an error before starting to write swfl.

Could be damaged HD ?
Are you flashing with your or with donator FA ?

Hard drive works no problem. I did not change hdd after writing GL. I have no idea what information it contains in GL. Maybe it is necessary to make a new hard disk after the GL software has changed. I have TOSHIBA MQ01 disc. I can try this. But first we need to find out what information is in GL.

---

V850 fail, you can swap a power board to test or use vvid to write v850.

It's not the V850, dude. I tried this before. I reverted to V850 original firmware. The problem is that the software information in GL and the device are not compatible.

[wagusty]

Hi.
I have a full backup of an hw3.2 b211 i send you a pm.

[Mwahab]

Hi.
I have a full backup of an hw3.2 b211 i send you a pm.

can you share as well?

---

it fails on 271A swfl?

problem is btld. It throws an error before starting to write swfl.

Could be damaged HD ?
Are you flashing with your or with donator FA ?

Hard drive works no problem. I did not change hdd after writing GL. I have no idea what information it contains in GL. Maybe it is necessary to make a new hard disk after the GL software has changed. I have TOSHIBA MQ01 disc. I can try this. But first we need to find out what information is in GL.

---

V850 fail, you can swap a power board to test or use vvid to write v850.

It's not the V850, dude. I tried this before. I reverted to V850 original firmware. The problem is that the software information in GL and the device are not compatible.

if u managed to get communication with the old v850, write it, backup adjustblock, write the new v850 full, then rewrite the adjustblock from the original