[Tekero]

Hello, i have problem with sprinter 907.
After visiting an authorized service, the car has a speed limit limited to 81 km/h (this can be set on the cruise control/limiter).
Its not coding in cpc_ng module.
Every change to a higher speed than 80 km / h does not bring any result, while setting a lower one working fine.

[siwecki]

Hello, i have problem with sprinter 907.
After visiting an authorized service, the car has a speed limit limited to 81 km/h (this can be set on the cruise control/limiter).
Its not coding in cpc_ng module.
Every change to a higher speed than 80 km / h does not bring any result, while setting a lower one working fine.

give me remote access I increase limiter

[drcox]

Hey... How you solved the Problem??
Is it only CPC Coding??

[toutou_gsm]

Hello, i have problem with sprinter 907.
After visiting an authorized service, the car has a speed limit limited to 81 km/h (this can be set on the cruise control/limiter).
Its not coding in cpc_ng module.
Every change to a higher speed than 80 km / h does not bring any result, while setting a lower one working fine.

is it a USA 907?
anyway it can be unlocked in all cases

[gcs190]

Hello, i have problem with sprinter 907.
After visiting an authorized service, the car has a speed limit limited to 81 km/h (this can be set on the cruise control/limiter).
Its not coding in cpc_ng module.
Every change to a higher speed than 80 km / h does not bring any result, while setting a lower one working fine.

is it a USA 907?
anyway it can be unlocked in all cases

It is not necessary that it be a vehicle from that market, but yes, it is another different level of limitation and can be eliminated in any case.

[detti]

@gcs190
Hi, i have a similar problem. Have coded vmax in cpc_ng and tuned in ecu to 250km/h, but Sprinter still goes only 120km/h.
Is there still a restriction in the tcu modul ?
Please give me a hint to fix me problem.

Detti

[gcs190]

@gcs190
Hi, i have a similar problem. Have coded vmax in cpc_ng and tuned in ecu to 250km/h, but Sprinter still goes only 120km/h.
Is there still a restriction in the tcu modul ?
Please give me a hint to fix me problem.

Detti

Possibly it is not the same case, in fact it is modified...impossible to know without connecting to the vehicle.

[detti]

@gcs190
Hi, i have a similar problem. Have coded vmax in cpc_ng and tuned in ecu to 250km/h, but Sprinter still goes only 120km/h.
Is there still a restriction in the tcu modul ?
Please give me a hint to fix me problem.

Detti

Possibly it is not the same case, in fact it is modified...impossible to know without connecting to the vehicle.

Thank you for your answer.
I can't get back to the car until Monday. Is there any way I can check why it is not enough to modify the ECU and CPC to increase the specific speed limit? Is it enough to carry out the coding and the coding is immediately active or do I still have to carry out a hard reset or lock the car and wait for canbus silence or something similar. Sorry for the many questions

[gcs190]

Thank you for your answer.
I can't get back to the car until Monday. Is there any way I can check why it is not enough to modify the ECU and CPC to increase the specific speed limit? Is it enough to carry out the coding and the coding is immediately active or do I still have to carry out a hard reset or lock the car and wait for canbus silence or something similar. Sorry for the many questions

A reset, an off-on ignition cycle, letting the car go to sleep, it's all the same and that's not a problem, I'm sure you've already been through one of them.