[CenturionM]

Hello


I have a problem with an OKI 5054a clone

I install odis service 7.2.1 fantomel, I follow everything step by step, but there is a problem:
- softing detects 5054a, adds it to the COM3 port, but in the hardware section it does not read data from the interface, there is no identification
- softing also reads 5054a via the USB cable, but in the hardware section it does not load data from the interface, finally the information about the lack of

Odis Service 7.2.1 finally does not read the interface


whether when installing odis you need to select - Laptop/PC
1. VAS 6154
2. VAS 6154a
3. PassThru

which of them?

does anyone have ideas about this problem?
I did a system reinstall and reinstall everything, on the old system everything worked, I don't remember what I did then, it was a long time ago

[adamos_22]

after successfull installation, did you replace "Bad 5054 files" from softing folder ?

[Cla73m]

I installed the same version of Odis on W10 and later on W11 and everything works perfectly with VAS5054 clone cable, during the installation you have to select VAS6154.

[CenturionM]

after successfull installation, did you replace "Bad 5054 files" from softing folder ?

Yes...

Final not work

---

I installed the same version of Odis on W10 and later on W11 and everything works perfectly with VAS5054 clone cable, during the installation you have to select VAS6154.

do you have version 5054 or 5054a?



I have 5054a




my SSD crashed, I had to replace it with a new one, now I'm trying to install all the software, I have a problem only with Odis


softing detects the bluetooth connection, but in the softing parameters it does not read the information from the 5054a

[Cla73m]

I have the VAS5054A version, try to double check all the steps to detect the cable, did you first install JAVA ?

[CenturionM]

I have the VAS5054A version, try to double check all the steps to detect the cable, did you first install JAVA ?

can you write me a manual? step by step what to install


what add-ons to install?


I've been trying for 3 days with this Odis S 7.2.1 Fantomel and no result

[jo27hn]

Look here and reaplace folder softing in programfiles x86

ODIS-Service 7.2.1 Postsetup 2560 (test) (cartechnology.co.uk)

[Cla73m]

can you write me a manual? step by step what to install


what add-ons to install?


I've been trying for 3 days with this Odis S 7.2.1 Fantomel and no result

First I installed the latest JAVA version, then I proceeded with the installation of Odis 7.2.1, once completed I went to the folder marked with number 5.W10 Universal install VAS505X (after unzipping it with WinRar ), then in a row

0.Install VC++2010 x86 version if needed.

1.Extract and replace the plugins in ODIS-S install folder
in C://Program Files (x86)Offboard_Diagnostic_Information_System_Service/Plugin

2.Run as Administrator D-PDU_API-Setup and then PDU_API-ODIS-S

2a(optional)If you have a clone replace files in:
64 bits Windows - C:\Program Files (x86)\Softing\D-PDU API\1.20.042\VeCom\VAS5054A
32 bits Windows - C:\Program Files\Softing\D-PDU API\1.20.042\VeCom\VAS5054A

3.Copy pdu_api_root.xml to "C:\ProgramData\D-PDU API\"
Make sure you choose the one that is right for your situation

4.Import to registry the .reg depending on your Windows 10 version (32bits or 64 bits).

5.Open the ODIS program and it should show you the cable

[CenturionM]

can you write me a manual? step by step what to install


what add-ons to install?


I've been trying for 3 days with this Odis S 7.2.1 Fantomel and no result

First I installed the latest JAVA version, then I proceeded with the installation of Odis 7.2.1, once completed I went to the folder marked with number 5.W10 Universal install VAS505X (after unzipping it with WinRar ), then in a row

0.Install VC++2010 x86 version if needed.

1.Extract and replace the plugins in ODIS-S install folder
in C://Program Files (x86)Offboard_Diagnostic_Information_System_Service/Plugin

2.Run as Administrator D-PDU_API-Setup and then PDU_API-ODIS-S

2a(optional)If you have a clone replace files in:
64 bits Windows - C:\Program Files (x86)\Softing\D-PDU API\1.20.042\VeCom\VAS5054A
32 bits Windows - C:\Program Files\Softing\D-PDU API\1.20.042\VeCom\VAS5054A

3.Copy pdu_api_root.xml to "C:\ProgramData\D-PDU API\"
Make sure you choose the one that is right for your situation

4.Import to registry the .reg depending on your Windows 10 version (32bits or 64 bits).

5.Open the ODIS program and it should show you the cable

Not work

[Cla73m]

Try using cable, don't connect via bluetooth, I use it with cable.