Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Peugeot 307 1.6 HDI dpf removed and remapped but there are alot of smoke
14-06-2015, 15:36 PM,
(This post was last modified: 14-06-2015, 17:12 PM by sensing.)
Post: #21
|
|||
|
|||
RE: {Peugeot 307 1.6 HDI dpf removed and remapped but there are alot of smoke
Hi guys i have diagnosed the car today and i got 3 codes permenant faults
I don't know what is that ? The picture is attached I have diagbox working with v7.60 And still the car dosn't go over 3000 rev Thank you |
|||
15-06-2015, 17:25 PM,
Post: #22
|
|||
|
|||
RE: {Peugeot 307 1.6 HDI dpf removed and remapped but there are alot of smoke
Hi Mate have you noticed that hte fuel additive fault is distant and not local.meaning it it is not directly the cause of engine ecu but rather another ecu that is sending that fault.just a thought,It could be configurations
|
|||
16-06-2015, 10:29 AM,
Post: #23
|
|||
|
|||
RE: {Peugeot 307 1.6 HDI dpf removed and remapped but there are alot of smoke
(15-06-2015, 17:25 PM)Vish Wrote: Hi Mate have you noticed that hte fuel additive fault is distant and not local.meaning it it is not directly the cause of engine ecu but rather another ecu that is sending that fault.just a thought,It could be configurations how to re configuration the BSI BTW when i tries to delete the faults , he asked to enter my mileage and then he said there are more than 6 counter reset can't delete the fault and the diagbox previewed the old 6 counter resets all like this 00 00 00 Without the mileage i think now the problem with bsi is there are any solution for this car ? |
|||
24-06-2015, 13:02 PM,
Post: #24
|
|||
|
|||
RE: Peugeot 307 1.6 HDI dpf removed and remapped but there are alot of smoke
Hi guys
am stuck at how to disable the fab from diag box i have no chance now i installed pp2000 can any one explain how to disable it by pp2000 thank you |
|||
17-07-2015, 20:44 PM,
Post: #25
|
|||
|
|||
RE: Peugeot 307 1.6 HDI dpf removed and remapped but there are alot of smoke
Hi there guys
i still had the problem with the car what i did 1. remapped the ecu with rclassic donator file 2. by pp2000 disabled the fab and the attached pictures shows the configuration but there is two permanent fault can't be deleted and the car had a limit revs RPM 3000 Max can anyone please help me with that faults and the current problem what shall i do ? or from where shall i begin ? any advice any help thank you |
|||
19-07-2015, 08:09 AM,
Post: #26
|
|||
|
|||
RE: Peugeot 307 1.6 HDI dpf removed and remapped but there are alot of smoke
Hi, your problem is in the configuration file, you can test the hex code in a healthy load switch and fix
|