[nath106]

Check the lower intercooler pipe, they have a tendancy for collapsing and contaminating with oil

what colour smoke btw?

[sensing]

Check the lower intercooler pipe, they have a tendancy for collapsing and contaminating with oil

what colour smoke btw?

i checked all the pipes all they are good

the colour of smoke it seems for me white

but this coming only while the car is stop and pressing acceleration

---

Hi guys ,
i tested the car today , i found the car still as it's , not get over RPM 3000 , no smoke while the car running on motor way , the smoke comes only when push down acceleration while the car stopped ,
the coolant level low sign is on but the temperature not over 70 C and sign fuel level low on as well
but there are enough water and enough fuel ,
i checked the turbo pipe they are good
i think i have to reset the ECU by diagnostic tool
i need your opinion guys , what shall i do ?
what the next step ?
thank you

Did you make a scan to see if there are any dtcs stored?

i will do today and i will let you know

thank you

[nath106]

So the car revs past 3000rpm when on the move / doesnt smoke when driving?

this all happens ONLY when stationary?

[sensing]

So the car revs past 3000rpm when on the move / doesnt smoke when driving?

this all happens ONLY when stationary?

yes exactly , while driving the car no smoke and the car doesn't go over 3000 rpm

[rclassic]

With your original file you got same smoke an rev. limit?
Try this modification, and be sure to turn off the FAP in the BSI with pp2000 or Diagbox.

[sensing]

I haven't pp2000 or diagbox

what shall i do then ? and i don't know how to turn it off , there is any other way ?

what the main problem for the smoke ?

i really appreciate your help

thank you

[rclassic]

Only solution I know are disable by pp2000 or diagbox on BSI, mod ECU and remove filter.

[bursuc]

Only solution I know are disable by pp2000 or diagbox on BSI, mod ECU and remove filter.

This is the only solution... i dont know eighter other tool to cancel DPF and aditive from BSI ....

It could be some injector codes problem aswell ? did you check them ?

Regards,

[pollete]

Hello.
He is starting the fault through the roof.
first you need to read the DTC.
You need lexia.
You have to configure the vehicle without fap in the BSI, and
also you can set injectors and other parameters
the engine ecu and bsi.
Sorry for my English.
Good luck.

[sensing]

I bought lexia 3 v50 support peugeot 307 and waiting to receive it to solve the problem


thank you
i will let you know when i receive it