Possibly Related Threads…

***Thriller*** · 01-06-2015, 21:37 PM,

Hi to everybody,
playing with this tool I deleted my factory navigation fsc code. Certificate is present and accepted.

[Image: fstool04-vi.jpg]

Is there a way to recover them?

***ruben_17non*** · 01-06-2015, 22:17 PM,

No use "a" use "A"547541
you not have copy of FSC pack for reimport?

***Thriller*** · (This post was last modified: 02-06-2015, 10:20 AM by Thriller.)

I didn't Write a or A but It's the software that shows the parameter in that way... I don't know why.

Some time ago I saved some files but I don't remember if they were codes or certificates.
I've attached one of them. Do you know the procedure to import them?

Is there some other ways?

Thanks

***litany*** · 02-06-2015, 18:53 PM,

How did You manage that?

***duckdonald*** · 02-06-2015, 19:30 PM,

(01-06-2015, 22:30 PM)Thriller Wrote: I didn't Write a or A but It's the software that shows the parameter in that way... I don't know why.

Some time ago I saved some files but I don't remember if they were codes or certificates.
I've attached one of them. Do you know the procedure to import them?

Is there some other ways?

Thanks

you have a copy of the file:
generalPersistencyData_DiagnosticSWTController?

try to read it and see what it contains.

***Thriller*** · (This post was last modified: 03-06-2015, 07:38 AM by Thriller.)

No I haven't. I can take it from the hard disk of the main unit if it is backupped somewhere. Tomorrow I wiil check.

Could you explain the difference between code and certificate?

Thanks

***Thriller*** · (This post was last modified: 04-06-2015, 07:10 AM by Thriller.)

Yesterday evening I've tried to make a backup via ftp but it's too slow and after a couple of hour I deleted the transfer.

After hundred attempts to do something with FS tool I've tried to delete DiagnosticSWT (I've backupped it before) and for a while I thought that this made the trick...

[Image: Ripristinato-vi.jpg]

But this dream was long as a single reboot... and after that the truly reality was showed to me, FCS code were rejected again...

I see from the picture that cas vin is pending.... It could depend by that? The problem could be the "a" instead of "A"?

***wolli*** · (This post was last modified: 04-06-2015, 11:31 AM by wolli.)

...is why you play with a tool when absolutely no knowledge available??? Sometimes some tool should not be for the general public.
It is now difficult to understand what happened to you when you've shot up system, then helps only new update of CIC.

Are the repairs FSC available for your VIN? Certificate is like a fingerprint, and without FSC does not, you need repair FSC which consisting of 3 files.

Greets

***masa52*** · 04-06-2015, 12:03 PM,

You need repair code from ASAP for your VIN

***Thriller*** · 04-06-2015, 12:23 PM,

Because I was playing with 17.... that was enable by script and I didn't know that tool would have erased all other FSC.

Only the dealer has the repair code?

I haven't checked yet if I have some backup in /mnt/hbdebug

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	BMW Service history by VIN	bmt_hr	6,124	503,502	Today, 09:12 AM Last Post: Dieusev
	REQUEST FSC CODE	muskatas	4,282	361,977	25-04-2024, 16:38 PM Last Post: Thorsten
	F10 0610 P2 timeout on Service DSC	redog4dy	0	40	22-04-2024, 11:38 AM Last Post: redog4dy
	BMW Navigation Maps FSC activation code (request)	rogerkj71	82	11,410	17-04-2024, 08:29 AM Last Post: Erezbmwm
	FSC Code for Route Maps	Bimmer540	236	34,579	15-04-2024, 12:50 PM Last Post: energjia
	DDE509 Internal fault 7 code 4703	GoNz0-	0	68	14-04-2024, 14:42 PM Last Post: GoNz0-
	Mini Tooth to mechanical code	koziol	0	90	14-04-2024, 14:27 PM Last Post: koziol
	VO code RSE_HIGH_NBT2 error	HU_man	3	162	12-04-2024, 07:08 AM Last Post: Node
	BMW HU SERVICE MANAGER	user_530d	126	36,310	10-04-2024, 10:29 AM Last Post: aigle
	BMW HU Service Manager Extended	Markanthony	13	3,766	05-04-2024, 19:08 PM Last Post: Edward1968

Contact Us