Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW F11 CAS4 dead after read on bench
18-03-2023, 09:50 AM,
Post: #1
|
|||
|
|||
BMW F11 CAS4 dead after read on bench
Hi guys.
Strange thing. I was reading CAS4 5M48H on bench with VVDI Prog and CAS 4 solder free adapter. Backup berofe adding key. 2 first attemps nothing, I reconnect adapter and PROG started reading. Results: D-flash and P-flash empty... I ordered new CAS from BMW, but how is possible that only with reading is CAS dead? I tried solder it then but same results. Why Im writing here. Has anybody some P and D flash for this unit? It doesnt matter what type, I would like to test only dead CAS, where is mistake. Thanks 5WK50323LBR, CAS4 CG+ELV |
|||
18-03-2023, 17:17 PM,
Post: #2
|
|||
|
|||
RE: BMW F11 CAS4 dead after read on bench
(18-03-2023, 09:50 AM)djalby Wrote: Hi guys. Thats full read from a similar one. Write your vin, ECU ISN, Edit Frequency, Virginize keys, flash with ur FA .. everything should be good. Enjoy ur day. |