[sensing]

You FAP has problems...try to recode fap on sections engine-intervent fap-write new values of quantity of aditif 3 liters-test the action of aditiv pump...cancel errors

when i try to delete the error says you have to reset the counter

when i try to reset it says you have reset 6 times before

[sensing]

Hi guys

am stuck at how to disable the fab from diag box

i have no chance

now i installed pp2000

can any one explain how to disable it by pp2000

thank you

[sensing]

Hi there guys

i still had the problem with the car

what i did
1. remapped the ecu with rclassic donator file
2. by pp2000 disabled the fab and the attached pictures shows the configuration

but there is two permanent fault can't be deleted and the car had a limit revs RPM 3000 Max

can anyone please help me with that faults and the current problem

what shall i do ? or from where shall i begin ?

any advice any help

thank you

[mike_service]

Hi
put back the connector from additiv reservoar,dont was disable it in flash
interogate again ecu and than that dtc must be intermitent

Mike

[sensing]

Hi

i didn't disconnect any connector

i just flashed the file with fab disable and disable it with pp2000

i did only take the pdf out and cleared it from internal

can you please explain more what shall i do exactly ?

thank you