[NickMayer]

Hello

does anyone know how to connect this Ecu on table ? It has MPC5566 microcontroler but not know is the pinout
I would be very grateful for your help.
When I connect Alex flasher by obd I can read idents but read problem , so I want to try when module is out but connection what I used o can not read idents . Nothing . Probobly I need to connect gpt0,1 but can not find location of pins .
Continental GPEC2
Dodge Charger 2011year 3.6vvt

[BPCD]

Hello

does anyone know how to connect this Ecu on table ? It has MPC5566 microcontroler but not know is the pinout
I would be very grateful for your help.
When I connect Alex flasher by obd I can read idents but read problem , so I want to try when module is out but connection what I used o can not read idents . Nothing . Probobly I need to connect gpt0,1 but can not find location of pins .
Continental GPEC2
Dodge Charger 2011year 3.6vvt

Hello

Here the pinout

Regards Marco

[loki954]

you will have one dead ecu with alex flasher. not sure that this alex flasher "changer" will work 
and better use something else then vxdiag.
all of this ecu read ok by obd with the proper tool. if the ecu is locked asume this one is not because is 2011 all read/write will work by obd. if the ecu is locked 2016+ then need to open it .

[NickMayer]

so far i got lucky with alex , as long i do checksum myself , i did delco e69(test) , e39, e39a work obd .
i have few j2534 devices , so sometimes one work sometimes diferent , so i just try one by one , and vxdiag only worked e39a by obd , sm2 pro didnt work bu vx worked . i gonne try to connect on table and see if can read flash orf same as obd ony idents . i dont habe many tool so i use what i can and try to make it work.