Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

FSC Generating for C984950
31-03-2023, 20:16 PM,
Post: #1
XZBMW  FSC Generating for C984950
Hi,

I replaced both DMEs of M6 and everything is ok now,except Rejected FSC codes of DME , 0095 and 007B.
when I downloaded them from BMW website, Esys shows me error about invalid creation date.
Can somebody help me to get regenrated fsc codes?
Regards,
Quote this message in a reply
31-03-2023, 21:49 PM,
Post: #2
RE: FSC Generating for C984950
You have two options:
1-You need to reissue them from BMW (costly)
2-clone this ecu from a dme with lower fsc creation date, then try to inject it.

All my knowledge is free for exchange with valuable information
Sharing->Development
  • FSC Repair kits - FSC Retrofits and Conversions Service history
  • Secure Coding 2.0 Type Key, FA, SFA, LCS Switch, SecOc, SME/HV Replacement
  • NBT/EVO/EntryNav2/MGU
  • MGU Carplay/Android auto W/O Telematics/CP/Patching in Middle East and Northern Africa
  • Feature Installer codes B2B
  • DME VIN ISN Working Hours IMMO OFF File and Remote Service/SWIFTEC - MG1 MD1 IMMO OFF
  • (E,F,G) 7DCT - DKG - 8HP - 6HP - EGS7 ISN Reset
  • KAFAS4 Virgin and Patching Remote
  • CAS2/3/4 Full IMMO & LOCKSMITH Customization Dump & Remote
  • HUF5663_434Mhz NO REMOTE SIGNAL FIX
  • F&G Series Headlight Customization
Visit this user's website
Quote this message in a reply
[+] 1 user says Thank You to Mwahab for this post
31-03-2023, 21:50 PM,
Post: #3
RE: FSC Generating for C984950
if you installed used ECU, you need to clone this unit instead of changing ISN/VIN/Working hours. The used ECU probably has newer FSC on it.


Quote this message in a reply
01-04-2023, 01:13 AM,
Post: #4
RE: FSC Generating for C984950
(31-03-2023, 21:49 PM)Mwahab Wrote:  You have two options:
1-You need to reissue them from BMW (costly)
2-clone this ecu from a dme without lower fsc creation date, then try to inject it.

Hi
Do you know anywhere to have this DME for cloning or have cloned file of it?
Quote this message in a reply
01-04-2023, 01:35 AM,
Post: #5
RE: FSC Generating for C984950
send part number, hwel, ecu photo

All my knowledge is free for exchange with valuable information
Sharing->Development
  • FSC Repair kits - FSC Retrofits and Conversions Service history
  • Secure Coding 2.0 Type Key, FA, SFA, LCS Switch, SecOc, SME/HV Replacement
  • NBT/EVO/EntryNav2/MGU
  • MGU Carplay/Android auto W/O Telematics/CP/Patching in Middle East and Northern Africa
  • Feature Installer codes B2B
  • DME VIN ISN Working Hours IMMO OFF File and Remote Service/SWIFTEC - MG1 MD1 IMMO OFF
  • (E,F,G) 7DCT - DKG - 8HP - 6HP - EGS7 ISN Reset
  • KAFAS4 Virgin and Patching Remote
  • CAS2/3/4 Full IMMO & LOCKSMITH Customization Dump & Remote
  • HUF5663_434Mhz NO REMOTE SIGNAL FIX
  • F&G Series Headlight Customization
Visit this user's website
Quote this message in a reply
06-04-2023, 06:27 AM,
Post: #6
RE: FSC Generating for C984950
(01-04-2023, 01:35 AM)Mwahab Wrote:  send part number, hwel, ecu photo

Hi,
Here you are.
These are ME 17.28


Attached Files Thumbnail(s)
           
Quote this message in a reply
10-04-2023, 14:43 PM,
Post: #7
RE: FSC Generating for C984950
(01-04-2023, 01:13 AM) navid Wrote:  
(31-03-2023, 21:49 PM)Mwahab Wrote:  You have two options:
1-You need to reissue them from BMW (costly)
2-clone this ecu from a dme without lower fsc creation date, then try to inject it.

Hi
Do you know anywhere to have this DME for cloning or have cloned file of it?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Is it tokenmaster generating the activation codes for ESYS? jamiem1987 3 1,112 18-02-2019, 17:19 PM
Last Post: sicess
XSMini NBT EVO MAP FSC generating Fatalix 1 666 18-08-2018, 18:52 PM
Last Post: tukan
XZBMW How are people generating full length FSC anchored 3 2,150 11-01-2017, 06:03 AM
Last Post: muskatas
XZBMW ETK prices file (generating) ozione 0 865 08-01-2017, 14:17 PM
Last Post: ozione

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content