[BliZZar911]

hey friends,

i have a problem with my BMW E91 320d

My Eprom of the old ECU is damaged without backup.

now I buy a new ECU with same Bosch Number
The new one:
HW: 08519668
SW: 1037522657
VIN: WBAPP31070F211605
SW Ver.: 
HW Ver.: 
SW Upg.: 08478862
Anlage: 

I hope could anybody help me with Immo off or Virginize

my car have following VIN:

WBAUY11030F051291

BMW ISTA+ is available


thank you really much for your help

[PsiDOC]

Post flash for immo off.
Cheers.
Psi

[BliZZar911]

here the flash read by ktag

[AZCKNCLLC]

here the flash read by ktag

here is immo off

[BliZZar911]

Unfortunately car don’t start.
Possible to do the new vin inside the eprom? Maybe I can reflash the ecu by winkfp if fit in the vin.

[AZCKNCLLC]

Unfortunately car don’t start.
Possible to do the new vin inside the eprom? Maybe I can reflash the ecu by winkfp if fit in the vin.

What fault codes are showing?

[BliZZar911]

Hey friends,
Now I bought a ACDP CAS and ISN module. Now I can read the CAS ISN Module.
Could anybody help me with isn and vin change at the engine DME?

[SkeYT]

Still need help?

[BliZZar911]

Still need help?

solved.! thank you for your help.

I read ISN (CAS3+) by OBD Yanhua ACDP and write in boot mode to EDC17C50.
after that programmed new ZUSB and vin by BMW WINKFP and car work fine