Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
EDIABAS.INI Setting for USB Ethernet adapter
11-05-2023, 16:09 PM,
Post: #1
|
|||
|
|||
EDIABAS.INI Setting for USB Ethernet adapter
Hi,
Can anyone send Edibas ini file or settings to get "USB-ethernet adapter" to work with ISTA? Ista works well with the OBD ethernet cable, but when I use the USB ethernet adapter it cannot find an IP. I tried both Interface = ENET and STD:OBD but non of them worked. |
|||
11-05-2023, 18:45 PM,
Post: #2
|
|||
|
|||
RE: EDIABAS.INI Setting for USB Ethernet adapter
Hi,
ediabs.ini for usb ethernet and internal ethernet is same settings. Interface should be - ENET |
|||
11-05-2023, 21:04 PM,
Post: #3
|
|||
|
|||
RE: EDIABAS.INI Setting for USB Ethernet adapter
|
|||
Reputation: +1 - MrDetailer [+1] | |||
11-05-2023, 21:55 PM,
Post: #4
|
|||
|
|||
RE: EDIABAS.INI Setting for USB Ethernet adapter
Have you configured IP4 on your "ethernet USB adapter"???
|
|||
12-05-2023, 06:32 AM,
Post: #5
|
|||
|
|||
RE: EDIABAS.INI Setting for USB Ethernet adapter
ISTA or ediabas dont give shit about on what bus ethernet adapter is connected. from ediabas point it just a regular ethernet interface, and you need to configure it properly to work.
|
|||
12-05-2023, 14:44 PM,
Post: #6
|
|||
|
|||
RE: EDIABAS.INI Setting for USB Ethernet adapter
Here is a link to the Enet configuration
|