Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CAS vin invalid issue
13-05-2023, 20:26 PM,
Post: #1
|
|||
|
|||
CAS vin invalid issue
I'm getting a invalid vin in cas error from my dsc module. I replaced the cas with a donor and changed the vin via r270 programmer. It reports the correct vin in inpa. Is there something I need to do in the DSC module? Photo of error in ISTA-p is attached.
|
|||
13-05-2023, 21:06 PM,
Post: #2
|
|||
|
|||
RE: CAS vin invalid issue
I don't know why you used the R270 as I just use NCS expert to flash and vin match, it might be worth a try?
|
|||
13-05-2023, 21:28 PM,
Post: #3
|
|||
|
|||
RE: CAS vin invalid issue
(13-05-2023, 21:06 PM)GoNz0- Wrote: I don't know why you used the R270 as I just use NCS expert to flash and vin match, it might be worth a try? I tried that before and even though it said the write was successful, the cas still reported the wrong vin. I was told the only way to change the cas vin was to use an r270 and solder to the board. |
|||
14-05-2023, 01:24 AM,
Post: #4
|
|||
|
|||
RE: CAS vin invalid issue
Post the cas eeprom and chassis VIN here.
|
|||
14-05-2023, 02:02 AM,
Post: #5
|
|||
|
|||
RE: CAS vin invalid issue
Flashing CAS with different vin doesn’t change vin.
You need to change vin in eeprom and correct crc if u are to change vin in cas. If the issue is in DSC only, code it, go to ista service functions, go to dsc related functions and u will have what u need All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
14-05-2023, 07:00 AM,
Post: #6
|
|||
|
|||
RE: CAS vin invalid issue
If you are sure you have the correct vin in the CAS and also in the CAS coding you run steering angle sensor calibration in ISTA.
Remember CAs must be coded first with ncs or ISTA p. | BimmerFiks AS | Instagram | |
|||
14-05-2023, 12:24 PM,
Post: #7
|
|||
|
|||
RE: CAS vin invalid issue
Send me your EEP CAS and VIN i would do it for you
|
|||
14-05-2023, 18:55 PM,
Post: #8
|
|||
|
|||
RE: CAS vin invalid issue
I changed the vin in the cas eeprom and it reports the correct vin now. However in not sure I changed the checksum to match. I'll post the eeprom dump tomorrow.
|
|||
15-05-2023, 12:13 PM,
Post: #9
|
|||
|
|||
RE: CAS vin invalid issue
Wrong solution........
Post dump from cas hier Br Eddy immo daten transfer
cas dump reparatur cvn fix No help for people not give a feedback |
|||
15-05-2023, 19:00 PM,
Post: #10
|
|||
|
|||
RE: CAS vin invalid issue
(14-05-2023, 12:24 PM)johann74270 Wrote: Send me your EEP CAS and VIN i would do it for youThe vin is WBAWL7C51AP475356 Here is the dump. |