[Mex165]

Have given up on finding a SD flash solution for my AID.

As my AID has 3G0920791B, I would like to get it C or D (I have these files).
But how do I do this in the safest way? Odis-E (from here ), VCP (original) or with ODIS-S (original)?

I know it takes loooong

If somebody has done this with success, please share how to 

[Mex165]

Has this never been done?

[Versus]

You can flash without any problem B to D with ODIS E.

[Mex165]

Getting this:

The following flash prerequisites were damaged by the control module "instrument cluster"

Vehicle immobilizer is not activated

Do you want to continue the procedure?

[Mex165]

How to proceed?
First flash to C?

[Mex165]

Anybody have SD files for flashing to D (or C)?

[Mex165]

Getting this:

The following flash prerequisites were damaged by the control module "instrument cluster"

Vehicle immobilizer is not activated

Do you want to continue the procedure?

It is because I use a Maxiflash Elite J2534, I guess.. 

Should be good to go?

[Mex165]

I have the SD files to flash AID from B to C..
But I have to change AID EEPROM (from 3G0920791B to C) with ODIS to be able to use these files.

Does anybody know how this is done?

[Ryan.]

I have the SD files to flash AID from B to C..
But I have to change AID EEPROM (from 3G0920791B to C) with ODIS to be able to use these files.

Does anybody know how this is done?

this eeprom isnt the virtual dash.. its 5f from some audi

[Mex165]

Do you know how?
The picture is just an example of eeprom mod with odis..