[hero3838]

I have 2014 BMW f15 x5 mu car already have 5AL and 5DF options I want to add lane departure warning (LDV) option is it only coding enough or need any hardware already have kafas2. Also my car has pma module but doesn’t have self parking option if I install 2 sensors and adding self parking coding is enough?
My vin number WBAKS2106F0K85855

[TheNine90]

LDW need kafas, vibration actuator in steering wheel and lane departure warning button in the driver assistance control panel.

[hero3838]

LDW need kafas, vibration actuator in steering wheel and lane departure warning button in the driver assistance control panel.

Kafas2 and vibration sw already have and intelligent safety button have . For line change warning need radar sensors and rear mirrors with lcw led. For LDW only kafas is enough but I want to know coding list

[TheNine90]

For that you can compare cafd of 5AT/5AS with current cafd and check the parameters are responsible for LDW since F15 doesnt have 5AD

[Mwahab]

Let’s speak with VO
If you already have KAFAS, Vibration (Supported SZL), Lane change warning in mirrors 5AG, then you can delete 5AG, then add 5AS, 8TH import fsc, and u will have fully functional kafas options

If you don’t have the following, its a different story

[hero3838]

Yes f15 options does not have alone 5AD .I already tried adding to FA but not accepted I need to know whic option code included LDW anti collision . Only need to know this option list

[Siki78]

Just Added 5AS and you will need 3 fsc BE BF and 7E. Don't delete 5AG because it is not part of 5AS.

[hero3838]

I don’t have 5ag lcw option , options list as below
S508 Park Distance Control (PDC)
S534 Automatic Air Conditioning
S548 Kilometre Speedo
S552. Adaptive LED Headlight
S563 Light Package
S5A3 BMW Night Vision With Dynamic Light
S5AC High-Beam Assistant
S5AL Active Protection
S5DF Active Cruise Control+Stop&Go Function
S5DL Surround View

---

Just Added 5AS and you will need 3 fsc BE BF and 7E. Don't delete 5AG because it is not part of 5AS.

Where can I found or buy this 3 fsc (BE BF and 7E)

---

Ok I will try to code FA to 5AS and then check without fsc 5AS works or not I don’t know.
2. Questions which module need to code with this FA icm,kafas2, szl, HU , DSC ?? Is enough
Normally my car doesn’t have lcw and ldw but at startup my steering wheel vibrates if I don’t have why car has vibrating s.w?

[Siki78]

See first with esys what fsc you have already in kafas

[hero3838]

I add fa 5as, 5ad and 8th code ıcm,eps, bdc, kafas and fdl code hu2 ldw working and vibrating steering wheel but when ı trun on trafic jam (5ar) by acc down button on screen have warning “traffic jam only on motorway “ and in ista have error codes ;steering wheel touch detection miss lin slave , signal (steering wheel vibration status 260.0.4) ınvaled transmiter szl error have but mu f15 does not have szl modüle may i need any other code module or fdl code? Steering wheel vibration working properly.
I checked fsc kafas2 only accept BE ,7E and BF status not available
As I remember someone did fsc issue without fsc for f10 kafas2 retrofit I search but couldn’t fine post
I retrofitted my nbt to nbt evo that is reason I did not code my hu2 code I did fdl code but on hu only I have collision warning and acc option on list , I changed only lane departure warning active but not seen on hu which fdl needs to change for ldw and tja on hu2?