[sebiosip]

Hi, i need immo of for mitsubishi colt 6, 1.3 petrol engine with ecu and etacs.
Ecu E6T42494
A1351507679

[luxervol]

your file waiting for the result

[sebiosip]

your file waiting for the result

I tried the file but don't start the car, when i put the ignition, starts the fan, and when i put the ignition at crancking position the car don't cranck, it starts the fuel pump and shut off the fan.

[luxervol]

you need to calculate the checksum before uploading

[sebiosip]

you need to calculate the checksum before uploading

aaa ok, now i don`t know how to do but i will learn and i will back with results

[sebiosip]

i tried to rewrite crc from original file on adress 10 (ABDCEF), on 90 (ABCDEF) and 1F0 (ABCDEF) but not work, your file i would say is good because i don`t have the error with immo, the problem i guess is the CRC.

[raffy haddad]

When file been moded need checksum with the moded bytes you can't write nack orig cheks to moded file
use tools like winols or any suitable chks tool or some tools that read and write ecu have auto cheks

[luxervol]

i tried to rewrite crc from original file on adress 10 (ABDCEF), on 90 (ABCDEF) and 1F0 (ABCDEF) but not work, your file i would say is good because i don`t have the error with immo, the problem i guess is the CRC.

what tool do you use to read?

[sebiosip]

i tried to rewrite crc from original file on adress 10 (ABDCEF), on 90 (ABCDEF) and 1F0 (ABCDEF) but not work, your file i would say is good because i don`t have the error with immo, the problem i guess is the CRC.

what tool do you use to read?

I read with Ktag

[sebiosip]

i tried several options but i don`t succeeded to make the checksum calculation, i tried with winols but i need OLS819 for that.

Just now i tried to reinstall kess but same, isn`t make the checksums...