Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
the new reversing camera won't open 5Q0980556B Passat B8
28-05-2023, 13:31 PM,
Post: #1
|
|||
|
|||
the new reversing camera won't open 5Q0980556B Passat B8
Please give me a hint because I don't know where to look for the problem anymore ... I installed a new reversing camera, of course I uploaded the parameters, coded. 5F and parking sensors coded and I don't want to eject the camera. I get the error External control short circuit to ground B13C311
The image appears for literally 3 seconds and the information from the parking sensors is temporarily unavailable (because the camera does not extend) If I apply power directly to the motor from the camera, it slides out without any problems Is something badly coded in 5F? maybe the camera is messed up? The lid opening works fine CAM 5Q0980556B Passat B8 |
|||
28-05-2023, 16:44 PM,
Post: #2
|
|||
|
|||
RE: NEW Rev CAM 5Q0980556B not work
What is the coding of camera unit 6C?
When you put the reverse gear in, the VW badge is not opening? |
|||
28-05-2023, 18:13 PM,
(This post was last modified: 28-05-2023, 18:20 PM by wojoo.)
Post: #3
|
|||
|
|||
RE: NEW Rev CAM 5Q0980556B not work
Code: I did as below Coding 5F -> 02840201FF0000005111000400080A001F0100E4012004009F Coding 6C -> 0184020163002017000040 |
|||
28-05-2023, 18:43 PM,
Post: #4
|
|||
|
|||
RE: NEW Rev CAM 5Q0980556B not work
Camera brand new? Or used ?
|
|||
28-05-2023, 19:00 PM,
Post: #5
|
|||
|
|||
RE: NEW Rev CAM 5Q0980556B not work
What harnes have you used? The chinese supplied harnesses tend to be wrong a lot of times. At least this is my experience, I had to correct the harness...
|
|||
28-05-2023, 20:10 PM,
(This post was last modified: 28-05-2023, 20:16 PM by wojoo.)
Post: #6
|
|||
|
|||
RE: NEW Rev CAM 5Q0980556B not work
(28-05-2023, 18:43 PM)Versus Wrote: Camera brand new? Or used ? Brand New 3G0827469JB (28-05-2023, 19:00 PM)icardiag Wrote: What harnes have you used? The chinese supplied harnesses tend to be wrong a lot of times. At least this is my experience, I had to correct the harness... my cables do not have the long yellow cable that is visible in the picture. The yellow cable only goes from the 4 pin plug to the 8 pin plug |
|||
29-05-2023, 09:14 AM,
Post: #7
|
|||
|
|||
RE: NEW Rev CAM 5Q0980556B not work
please see if the bundle of these cables is ok?
Isn't the yellow with red in the 4-pin cube interchanged? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content