Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
w202 38 pin xentry / sd connect
06-06-2023, 20:03 PM,
Post: #1
|
|||
|
|||
w202 38 pin xentry / sd connect
Can I use xentry / sd connect with old w202 250 diesel (om 605.910)
it does have engine ecu 014 545 59 32 or does it need old diag tester? |
|||
06-06-2023, 20:19 PM,
Post: #2
|
|||
|
|||
RE: w202 38 pin xentry / sd connect
Yes, you can.
Just you need before 1997 model year HHTwin. After 1997 DAS is good enougth. |
|||
06-06-2023, 20:19 PM,
Post: #3
|
|||
|
|||
RE: w202 38 pin xentry / sd connect
You can try it, if you can't connect with the module, you should use an impulse counter.
|
|||
06-06-2023, 22:57 PM,
Post: #4
|
|||
|
|||
RE: w202 38 pin xentry / sd connect
(06-06-2023, 20:19 PM)Joe2 Wrote: Yes, you can. Its from 2001 but no coms with engine or abs with HHTwin ? (06-06-2023, 20:19 PM)gcs190 Wrote: You can try it, if you can't connect with the module, you should use an impulse counter. Yep, I'll give it a go see if I can get any flash codes |
|||
07-06-2023, 18:29 PM,
Post: #5
|
|||
|
|||
RE: w202 38 pin xentry / sd connect
Car from 2001, I think, all modules should be in DAS ?
And I guess you have OBD2 connector. Maybe some modules are in HTTWin, most should be in DAS. Do you have both 38 pin and obd2 connector in the car ? |
|||
08-06-2023, 06:16 AM,
Post: #6
|
|||
|
|||
RE: w202 38 pin xentry / sd connect
(07-06-2023, 18:29 PM)Joe2 Wrote: Do you have both 38 pin and obd2 connector in the car ? No just 1, the 38 pin on right hand side engine compartment |
|||
08-06-2023, 06:57 AM,
Post: #7
|
|||
|
|||
RE: w202 38 pin xentry / sd connect
Are you sure it is 2001 W202 ?
In 1997 there was facelift and CAN network was introdused. I thought there is 16 pin obd2 connector and all diagnostic is in DAS (just know car from 1995, so HTTwin and 38 pin socket). PS. Until 1997 there is black line on bottom of bumpers, after lift bottom of bumpers has shaped covers in color of the car. |
|||
08-06-2023, 09:04 AM,
Post: #8
|
|||
|
|||
RE: w202 38 pin xentry / sd connect
That vehicle always used the 38-pin connector, in some of the latest production and for certain markets, the EOBD connector could be incorporated for legal reasons and it only supports OBD diagnostics, in W202 everything is K line and these modules are often diagnosable by the impulse system.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content