[budddyyy]

Hello Guys i have intern error in eeprom from emf modul from e71 x6
Now i have new dump and will Write on eeprom but i cant read the eeprom anyone knows how are the Settings to read? I only found M95080 unser the section St but it don’t works

Thanks in advance

[PUMUKY1]

VVDIProg reads 95080 very well, I have read many without problems.

With Eeprom-Clip-adapter-V1.0 and clamp, you can read, some need to desolder Eeprom and put into programmer

[budddyyy]

I have desolder the eeprom and tried to read with this Adapter picture in attachement . And have select st
M95080
But always error 00 chip Not Connect

[foxportal]

Photo of soldered Eeprom and try to press it a little in the programmer.

[fitacuevas]

I have desolder the eeprom and tried to read with this Adapter picture in attachement . And have select st
M95080
But always error 00 chip Not Connect

Ensures that the chip is well attached to the adapter. It has happened to me once that it seems to be well placed and just by moving it a little it works.

if it keeps failing try to solder it on the eeproms board, that doesn't fail