Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Problem M5 F10 ECU Master or Slave
18-06-2023, 16:17 PM,
Post: #1
|
|||
|
|||
Problem M5 F10 ECU Master or Slave
Hello, I have a problem on an M5 F10. My customer has one of his DME MEDV17.2.8 ECUs (bank 2) that burned out. I bought a used ECU, and I cloned the ECU from bank 1 to bank 2 in BENCH with AUTOTUNER. However there is a "master" ECU and a "slave" ECU. I reassembled both ECUs to the vehicle, then flashed with SDP 4.39.20 (i-level 22-11-xxx) and ESYS 3.40. The car starts and drives. However there is a "powertrain" error in the idrive CIC system. I pass the ISTA diag, and I have a "1B2904: protection against SWT manipulations: speed limitation" fault. This defect after carrying out a control plan turns out that it is necessary to designate the "SLAVE" ECU and the "MASTER" ECU (there are two SLAVE ECUs or two MASTERs)... I cloned the bench 1 on bench 2, so I have two identical ECUs. The car starts and drives. How to solve this problem ?
Developed software :
- ESYS TARGET (free download for all) - French Bimmer Database (coding database for French) - BMW Performance Evolution System (Launcher) |
|||
18-06-2023, 17:10 PM,
Post: #2
|
|||
|
|||
RE: Problem M5 F10 ECU Master or Slave
I think you just need to code slave DME properly. And don't forget to set injector compensation values!
|
|||
18-06-2023, 17:27 PM,
Post: #3
|
|||
|
|||
RE: Problem M5 F10 ECU Master or Slave
(18-06-2023, 16:17 PM)CARTERMILLER Wrote: Hello, I have a problem on an M5 F10. My customer has one of his DME MEDV17.2.8 ECUs (bank 2) that burned out. I bought a used ECU, and I cloned the ECU from bank 1 to bank 2 in BENCH with AUTOTUNER. However there is a "master" ECU and a "slave" ECU. I reassembled both ECUs to the vehicle, then flashed with SDP 4.39.20 (i-level 22-11-xxx) and ESYS 3.40. The car starts and drives. However there is a "powertrain" error in the idrive CIC system. I pass the ISTA diag, and I have a "1B2904: protection against SWT manipulations: speed limitation" fault. This defect after carrying out a control plan turns out that it is necessary to designate the "SLAVE" ECU and the "MASTER" ECU (there are two SLAVE ECUs or two MASTERs)... I cloned the bench 1 on bench 2, so I have two identical ECUs. The car starts and drives. How to solve this problem ? Workbench 1 DME master and workbench 2 DME slave. Programming the two DME with ISTA will solve your problem. That's if you don't have other problems including with the DME themselves |
|||
18-06-2023, 17:54 PM,
Post: #4
|
|||
|
|||
RE: Problem M5 F10 ECU Master or Slave
(18-06-2023, 16:17 PM)CARTERMILLER Wrote: I have a "1B2904: protection against SWT manipulations: speed limitation" fault. hello, you need repair fsc. - FSC Apple CarPlay for NBT Evo Fullscreen and MGU OEM
- FSC-Set for Retrofit CiC, NBT and NBT Evo with USB 18-11 or remote - FSC Kafas BE, BF and 7E SLI, Kafas4 Speedlimit 11F, WWA 13, FCW 13F - VIM for NBT Evo, install with USB 18-11 or remote - FSC for BMW Apps, Sirius Radio, EPS ------------- Location is Germany |
|||
19-06-2023, 12:44 PM,
Post: #5
|
|||
|
|||
RE: Problem M5 F10 ECU Master or Slave
Master and slave have different FSCs. You should also rewrite the serial number
|
|||
19-06-2023, 19:48 PM,
Post: #6
|
|||
|
|||
RE: Problem M5 F10 ECU Master or Slave
yes, usually 1 number difference in serial number of DME's
|
|||
19-06-2023, 19:52 PM,
Post: #7
|
|||
|
|||
RE: Problem M5 F10 ECU Master or Slave
I think it was better to write new ISN, reset hours, program, inject FSC
All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
26-06-2023, 06:41 AM,
Post: #8
|
|||
|
|||
RE: Problem M5 F10 ECU Master or Slave
I can do remote, enet/icom only
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw G31 retrofit Mgu id7 atm problem | intranet | 19 | 2,268 |
15-04-2024, 09:21 AM Last Post: evaldazj |
|
BMW E60 coding problem | GarageX | 8 | 348 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 152 |
28-03-2024, 18:47 PM Last Post: Unspec |
|
ISTA launcher problem | Red_bean_bun | 1 | 246 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
|
Dme Cas synchronization Problem | donjuan020 | 3 | 264 |
25-03-2024, 21:55 PM Last Post: BmwMerc |
|
BMW e39 530d 2001 problem after MAF change | boweld11 | 3 | 159 |
24-03-2024, 22:44 PM Last Post: SkeYT |
|
Entrynav2 Maps Problem | Chillmeister | 3 | 351 |
24-03-2024, 17:18 PM Last Post: Chillmeister |
|
For anyone having problem with ICOM NEXT FW update via ISTA+. | ImmBoo | 16 | 4,134 |
24-03-2024, 11:29 AM Last Post: Twointje |
|
Battery lead positive underfloor problem | da.2022 | 10 | 294 |
24-03-2024, 09:38 AM Last Post: pupu144 |
|
Problem Retrofit electrified steering column on the G31 LCI | smercki | 12 | 485 |
22-03-2024, 12:55 PM Last Post: Node |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content