[nn-sash]

Hi, Guys. I have sex with Audi A6 2010 Simos 8.10 4F2 910 552 C  CCDA HW H07. Car with a suspected faulty control unit. Another block with the same HW and SW was bought on the market, but this is Simos 8.10 and not everything is so simple. There is not much information on it, but it will not be possible to simply copy it, i need to modify immo file to make clone ecu. Is it possible to clone ?

[jokir]

I need a full read to Tricore by BSL

[nn-sash]

Dear Jokir bsl full here

[jokir]

For cloning I need to get MCUID ECU which is written in flash. In your case there is only 00 on the addresses where the MCUID is

[nn-sash]

Oh ok Jokir, full bsl in third post.

[jokir]

immodata donor
VIN: WAUZZZ4F4BN018553
CS: 01435EC6028600
MAC: B03CF35E
PIN: 36198
I can't decrypt immodata original, it's probably damaged by eeprom. The necessary data must be obtained from the BCM2 plus the synchronization data from the key.

[nn-sash]

Dear Jokir may be EZS Kessy? 2010 car year has bcm2?
orig ezs data is:
CS1: EB1E75FDD63C  CS2: AE2BC4575C57
PIN: 37521

[jokir]

Test and report new ee ECU

[nn-sash]

OK , Dear Jokir i test and report

[nn-sash]

Problem is solved by Jokir!!! Car starts!!!