Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Boot Loader Modus
19-06-2023, 20:05 PM,
Post: #1
|
|||
|
|||
Boot Loader Modus
Hi Guys,
I got an F30 - 2013 328xi non navigation that has "Boot Loader Modus' on the idrive screen and it is not functioning. bitte warten sie bis der software loading vorgang beendet ist please wait until the software loading process is finished. Does anyone know how this can be fixed? When I connect to ista it restarts the unit and it temporarily starts working but then after a few days this issue reappears. We are not able to reboot the unit by holding down the power / volume either. |
|||
19-06-2023, 20:10 PM,
Post: #2
|
|||
|
|||
RE: Boot Loader Modus
Try to flash, if not replace with an entrynav unit, Hu entry ussually bricks
|
|||
19-06-2023, 20:11 PM,
Post: #3
|
|||
|
|||
RE: Boot Loader Modus
most likely defect in Radio / CHAMP2
|
|||
20-06-2023, 12:57 PM,
Post: #4
|
|||
|
|||
RE: Boot Loader Modus
Dont bother change it with huentrynav
Don't ask for FREE FILES
Most tuning fies tested on Dyno by myself Tuning - DPF Off - EGR Off - or any etc Certificated WinOLS Trainer |
|||
20-06-2023, 13:04 PM,
Post: #5
|
|||
|
|||
RE: Boot Loader Modus
That sounds like a failed solder joint or a failing flash memory so sometimes processor reads memory correctly and sometimes not. You could try reflashing the unit. If that does not help then reflowing big chips. But it may be much easier to just replace.
|
|||
20-07-2023, 18:53 PM,
Post: #6
|
|||
|
|||
RE: Boot Loader Modus
the owner replaced the HUEntry with a used unit now the screen just says no signal, tried vo coding it but no communication with the replacement, does that mean replacement is also defective?
|
|||
20-07-2023, 19:20 PM,
Post: #7
|
|||
|
|||
RE: Boot Loader Modus
no comms to used unit? probably dead
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content