Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Need help with winkfp, downgrade DDE
24-06-2023, 16:22 PM,
(This post was last modified: 24-06-2023, 16:25 PM by Node.)
Post: #11
|
|||
|
|||
RE: Need help with winkfp, downgrade DDE
Have you looked at LIVE DATA???
P.S. If you must flash first, fix later, then I don't understand WHY you can't use comfort mode and enter ZUSB number manually into WinKFP and insist on using expert mode instead??? |
|||
24-06-2023, 17:11 PM,
(This post was last modified: 24-06-2023, 17:18 PM by ____ANGEL___.)
Post: #12
|
|||
|
|||
RE: Need help with winkfp, downgrade DDE
Original 7809200 you have to use 7809000.0pa 7809199.0da 06DDE71.IPO 03DDE71.PRG address 12 if you use data 27 but it will be the same as 8506834
(24-06-2023, 16:16 PM)newbie69 Wrote: DPF is not deleted so I want it to work. are you sure? the ecu can be wrote also without uif.... did you checked this in ident? The preheating module will be shutted off also if a worn battery is fitted and if i remember correctly, preheating is involved in regeneration. |
|||
24-06-2023, 18:44 PM,
Post: #13
|
|||
|
|||
RE: Need help with winkfp, downgrade DDE
(24-06-2023, 17:11 PM) Wrote: are you sure? the ecu can be wrote also without uif.... did you checked this in ident? The preheating module will be shutted off also if a worn battery is fitted and if i remember correctly, preheating is involved in regeneration. Yes the version running in car today is 8506834, checked in INPA. But if it is a worn battery i should have got a message warning of battery. All I want to test is to go back to stock because all this happened when we updated to 8506834. Anyone that has correct zusb with HW 7809000for a N47 Eu4 LL Manual transmission |
|||
24-06-2023, 18:47 PM,
Post: #14
|
|||
|
|||
RE: Need help with winkfp, downgrade DDE
These ZUSBs are all for your VIN over various firmware releases:
7808432 7809200 7811039 7811642 7812350 8506834 And this is a FULL list. Look which one is present in your data. |
|||
24-06-2023, 19:35 PM,
Post: #15
|
|||
|
|||
RE: Need help with winkfp, downgrade DDE
(24-06-2023, 18:44 PM)newbie69 Wrote:(24-06-2023, 17:11 PM) Wrote: are you sure? the ecu can be wrote also without uif.... did you checked this in ident? The preheating module will be shutted off also if a worn battery is fitted and if i remember correctly, preheating is involved in regeneration. checked how?? in ident or in uif? uif lies, ident no. For the other question, i've already answered in previous posts message of battery is not mandatory, and after flashing program+data it will take 3 hours to calibrate. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content