Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Bmw E87 116I N43B16 2A87 code
28-06-2023, 17:18 PM,
Post: #1
|
|||
|
|||
Bmw E87 116I N43B16 2A87 code
Have a 116I E87 with the N43B16 engine, have done the timing chain and changed the Vanos solenoid aswell as oilpump and oil pressure valve.
Keep getting the 2A87 Vanos code, also the car would start and shut off after a few seconds, if i disconnect the Exhaust Vanos electrical connection the engine starts and runs. Anyone had this issue before or know what to do? i have also checked the oil filter cage and the tap with O-rings that goes into the bottom, but looks good. |
|||
29-06-2023, 12:34 PM,
Post: #2
|
|||
|
|||
RE: Bmw E87 116I N43B16 2A87 code
try to do vanos adaptions
|
|||
01-07-2023, 06:47 AM,
Post: #3
|
|||
|
|||
RE: Bmw E87 116I N43B16 2A87 code
(28-06-2023, 17:18 PM)Haug530d Wrote: Have a 116I E87 with the N43B16 engine, have done the timing chain and changed the Vanos solenoid aswell as oilpump and oil pressure valve. Why are you not suspecting the vanos gear? When you go to ECU functions, vanos gear do you see movement of the gear? Are you sure inlet and exhaust connectors not reversed? |
|||
Reputation: +1 - al70 [+1] | |||
04-09-2023, 10:27 AM,
Post: #4
|
|||
|
|||
RE: Bmw E87 116I N43B16 2A87 code
(01-07-2023, 06:47 AM)willisodhiambo Wrote:(28-06-2023, 17:18 PM)Haug530d Wrote: Have a 116I E87 with the N43B16 engine, have done the timing chain and changed the Vanos solenoid aswell as oilpump and oil pressure valve. Hehe, i was very cautions then putting everything togheter that i should put the vanos unit in the correct place, i even put each unit in a bag and marked them, aparently what i did was somewhere along to mix them up. So, new stretch bolts ordered and ready to swap them over |
|||
Reputation: +1 - al70 [+1] | |||
09-09-2023, 18:57 PM,
Post: #5
|
|||
|
|||
RE: Bmw E87 116I N43B16 2A87 code
(28-06-2023, 17:18 PM)Haug530d Wrote: Have a 116I E87 with the N43B16 engine, have done the timing chain and changed the Vanos solenoid aswell as oilpump and oil pressure valve. Try to udpade, flash DME, it helps me couple times on MINI and BMW with 2A47 |
|||
10-09-2023, 00:13 AM,
Post: #6
|
|||
|
|||
RE: Bmw E87 116I N43B16 2A87 code
Ok, so the problem here is solved actually.
I was very aware that then i disasemblied the engine that the Vanos unit should not be mixed whatsoever, i even put them in their separated bags an marked them with Outlet and inlet. Well guess what? i somehow managed to mix them then putting it all togheter, haha. Well, anyway, the car is working fine now |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
REQUEST FSC CODE | muskatas | 4,282 | 361,682 |
10 hours ago Last Post: Thorsten |
|
Requesting fsc code 0x183 for kombi_sp18 | BMWF01 | 1 | 118 |
21-04-2024, 10:05 AM Last Post: BugFix |
|
BMW Navigation Maps FSC activation code (request) | rogerkj71 | 82 | 11,381 |
17-04-2024, 08:29 AM Last Post: Erezbmwm |
|
FSC Code for Route Maps | Bimmer540 | 236 | 34,553 |
15-04-2024, 12:50 PM Last Post: energjia |
|
DDE509 Internal fault 7 code 4703 | GoNz0- | 0 | 66 |
14-04-2024, 14:42 PM Last Post: GoNz0- |
|
Mini Tooth to mechanical code | koziol | 0 | 89 |
14-04-2024, 14:27 PM Last Post: koziol |
|
VO code RSE_HIGH_NBT2 error | HU_man | 3 | 162 |
12-04-2024, 07:08 AM Last Post: Node |
|
G05 KAFAS4 enable code missing after Retrofit ACC | 6ergsm | 19 | 2,478 |
26-03-2024, 12:33 PM Last Post: Hodgsonp |
|
How to change VIN code in VCM via Esys? | vipsha | 5 | 1,460 |
14-03-2024, 22:20 PM Last Post: tcp443 |
|
NBTEvo FSC lifetime Code for Road Map | vladmir1 | 27 | 6,856 |
29-02-2024, 07:45 AM Last Post: Jack79 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content