Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NCSExpert coding DSC56 in an R55 with K/DCAN
|
03-07-2023, 15:10 PM,
Post: #1
|
|||
|
|||
|
NCSExpert coding DSC56 in an R55 with K/DCAN
Following on from my auto to manual conversion, the only module I haven’t done a default code to since I changed the VO is the DSC module, as I get a comms error whenever I try to run SG_Codieren against the DSC.
I gather there’s some slight changes between auto and manual so would like to get it coded. Do I have to use an ICOM, or is there something I’m doing wrong? All other modules work with NCSExpert. Thanks. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
04-07-2023, 06:07 AM,
Post: #2
|
|||
|
|||
|
RE: NCSExpert coding DSC56 in an R55 with K/DCAN
DSC56 is very picky. Try coding it with the original FA to see if it is the setup or just unsupported coding.
|
|||
|
|
|
04-07-2023, 07:16 AM,
Post: #3
|
|||
|
|||
|
RE: NCSExpert coding DSC56 in an R55 with K/DCAN
Icom needed for R5X 2nd generation
|
|||
|
|
|
04-07-2023, 08:39 AM,
Post: #4
|
|||
|
|||
|
RE: NCSExpert coding DSC56 in an R55 with K/DCAN
|
|||
|
|
|
04-07-2023, 08:47 AM,
Post: #5
|
|||
|
|||
|
RE: NCSExpert coding DSC56 in an R55 with K/DCAN
Main problem with some modules is that they need large (as in 128 to near 250 bytes) data packets. ICOM handles that without any issues. 100% of chinesium DCANs DO NOT. They just truncate data (around 120-ish or 140-ish bytes, that was years ago so I do not remember actual number) and OF COURSE you will get errors.
To solve this you could reflash your cable with ediabaslib firmware. That is IF your cable is built using PROPER hardware inside of it and not cheaped down to death components. Thats solves 95% of cases of modules not working with such cables. |
|||
|
|
|
04-07-2023, 11:16 AM,
Post: #6
|
|||
|
|||
|
RE: NCSExpert coding DSC56 in an R55 with K/DCAN
R5X 2nd Gen DSC is unfortunately not compatible with DCAN. With ediabaslib firmware not too.
|
|||
|
|
|
04-07-2023, 14:33 PM,
Post: #7
|
|||
|
|||
|
RE: NCSExpert coding DSC56 in an R55 with K/DCAN
I’ve been looking for a good reason to buy an ICOM…
But then we get into genuine ICOM vs clone etc. I’ll do some reading, but are there any threads with details about how to navigate this minefield and make the right choices? |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| NBT Evo CAFD missing after coding error | Mugga | 13 | 559 |
11 hours ago Last Post: Mugga |
|
|
Coding a F80 M3 race car | PeterY | 9 | 374 |
Yesterday, 13:52 PM Last Post: PeterY |
|
|
SSD Creator Ncsexpert (New Tool) | scorpium59 | 549 | 39,787 |
23-04-2024, 20:55 PM Last Post: Mefiuu92 |
|
|
6wb cluster swap and coding | xMoses | 4 | 204 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
|
|
M performance brake DSC2 SBRE coding | Ckh091020 | 3 | 211 |
22-04-2024, 12:58 PM Last Post: Ckh091020 |
| pulling both paddles put transmission into neutral coding | tintoverano | 1 | 113 |
22-04-2024, 12:42 PM Last Post: raresh.tazz |
|
|
|
F20 LCI2 black panel cluster coding | sqorpius | 9 | 2,007 |
21-04-2024, 12:38 PM Last Post: Adekborys69 |
|
|
G01 2019 X3 - ATM Replacement/Coding Help Needed | jchisholm17 | 10 | 435 |
18-04-2024, 21:44 PM Last Post: jchisholm17 |
| TMS FRM3 F10 Coding issue | mj_mj_mj | 17 | 1,924 |
16-04-2024, 09:30 AM Last Post: user_530d |
|
| BMW F10 RHD to LHD coding? | morto | 12 | 1,486 |
13-04-2024, 17:32 PM Last Post: pablito94 |
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
