Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ CIC Bench Set Up Not Working
11-08-2023, 23:11 PM,
Post: #11
RE: CIC Bench Set Up Not Working
(10-07-2023, 08:47 AM)claw Wrote:  
(07-07-2023, 20:15 PM)MatthewLC Wrote:  ZGW is the high version.

Like I mentioned I went through all the connections and everything seems okay. I will double check optical signal on ZGW.

I'm pretty sure wake up signal is working. I hear CIC boot up. Also if I disconnect wake up signal, ESYS can no longer communicate with CID and IHKA.

Check most cable. Sometimes they came with swapped positions. Unplug both cables from one end and swap them.

This ended up being the issue! Most cable was installed backwards in the quad lock connector. Flipped the wires around and the CIC came to life! Thanks!




Possibly Related Threads…
Thread Author Replies Views Last Post
  FEM Not working with ENET but works wtih DCAN armenh7 1 61 29 minutes ago
Last Post: Marx
  e90 central locking not working ELMEPRO 9 126 2 hours ago
Last Post: Marx
XZBMW Tool for bench read 8hp Garryq 9 1,558 26-03-2024, 09:32 AM
Last Post: skywoker
  Bosch MEVD172H bench backup mrproper 1 249 23-03-2024, 18:43 PM
Last Post: Ratnik1990
XZBMW F90 MSA Memory not working bmw335coding 10 531 13-03-2024, 17:49 PM
Last Post: bmw335coding
XZBMW ENAV2 bench activation Airbus 10 796 25-02-2024, 08:17 AM
Last Post: jb2005
  Motronic 3.3.1 bench jaramillo 3 172 13-02-2024, 05:12 AM
Last Post: 2013m5
  Dde Coding/flash with esys in bench? ruben_17non 0 183 08-02-2024, 21:28 PM
Last Post: ruben_17non
XZBMW mevd17.2.8 working hours reset Mosso33 2 198 03-02-2024, 14:20 PM
Last Post: foxportal
  G30 LCI 3AG not working snf11lci 10 737 02-02-2024, 03:10 AM
Last Post: Bagum4uk

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content