[Matthew53]

Hi, is this possible to program Speech ECE swfl on entryNav2 from US?

 When I calculate SVT_SOLL with ECE typecode then esys generate four additional SWFL files - one for China speech and 3 for ECE speech.

I can't program any of those because it always throw HTTP fault at the start. I can program whole unit to newer I-level with US files so it's definitely some problem with these ECE speech. 

I guess maybe EntryNav2 has not enough memory space to save these additional ECE files. 

What do you guys think?

[kimz]

I had the same case but I couldn't solve it, it's not for every enav2, there are cases where it went through without a problem

[alexnaoumov]

didn't find a way either... check my post:
https://cartechnology.co.uk/showthread.php?tid=77913

[Airbus]

Last week I flashed a Enav2 HU for a german car for retrofitting 6CP.
Everything works fine, also german speech

It was a HWEL 17FA -> US Enav2

[Matthew53]

I think maybe it would allow to flash if V850 would be cleared. Just need to find a way to clear it as in EVO

[Airbus]

I think maybe it would allow to flash if V850 would be cleared. Just need to find a way to clear it as in EVO

no need to!

[Matthew53]

I think maybe it would allow to flash if V850 would be cleared. Just need to find a way to clear it as in EVO

no need to!

Ok in your case it worked with just flash, but apparently not every unit works this way, because I couldn't flash mine so I need to take some other steps to flash it

[Airbus]

I think maybe it would allow to flash if V850 would be cleared. Just need to find a way to clear it as in EVO

no need to!

Ok in your case it worked with just flash, but apparently not every unit works this way, because I couldn't flash mine so I need to take some other steps to flash it

the main problem is that there are so many HWEL´s on the market and nearly each HWEL needs a different flash. and btw there a 2 or more HWAP per HWEL on top!
It makes it a little bit complicated!
If you send me the HWEL and the little sticker on the side says somethink like "NB0xxxx" or "MB0xxxx" or "TB0xxxx".... i can send you the TAL for the current I-Step 23-07

[Matthew53]

I think maybe it would allow to flash if V850 would be cleared. Just need to find a way to clear it as in EVO

no need to!

Ok in your case it worked with just flash, but apparently not every unit works this way, because I couldn't flash mine so I need to take some other steps to flash it

the main problem is that there are so many HWEL´s on the market and nearly each HWEL needs a different flash. and btw there a 2 or more HWAP per HWEL on top!
It makes it a little bit complicated!
If you send me the HWEL and the little sticker on the side says somethink like "NB0xxxx" or "MB0xxxx" or "TB0xxxx".... i can send you the TAL for the current I-Step 23-07

Thanks, for now I don't have the sticker picture, but in the meantime I can send you HWEL and HWAP

HWEL_000040DF_002_001_004
HWAP_00004752_255_255_255

[Batje]

I think maybe it would allow to flash if V850 would be cleared. Just need to find a way to clear it as in EVO

Enav2 doesn't even have a V850...