[bboctavian]

Hello, i retrofited on my 530XD ACC with start and go - car is 05/2007 facelift.
Change the abs pump, put radar camera, put the right and left camera

and i have following errors:

62D2 Seat-occupancy detector, driver plausibility
63DF Interface, instrument cluster
63D9 Interface, airbag
62E2 Interface, navigation

In the past i retrofited and the comfort seat from a 2006 car with active, heat and vent.

I try to code: baurate_sbe_fahrer to value 02 but same error... ( i made in the past on another car and after i code baurate_sbe_fahrer to value 02 this error: 62D2 Seat-occupancy detector, driver plausibility disspear and ACC worked...

what i can do ?

[bboctavian]

UP nobody can help ?

I try to put on the driver seat a emulator from clixe to emulated the seat occupanccy, same error.

[Jartsa]

Did you code the car properly for acc?

[bboctavian]

Hello Jartsa - i put in FA - 5DF

After i code - ABS, ACC , LDM, KOMBI, AIRBAG

only think is i don t have the MAT in the driver seat ( my seats came from a 2006 car)

[Fx82]

Why not solve that iso coding ?

[bboctavian]

How can i do that?

[Fx82]

You say that you don't have the mat installed in the seat? If that is the case or it is defective repair it.
it is for your safety.

[0176.abraham]

now your problem is coding problem you have coded corectly?

[bboctavian]

Yes Fx82 my seat dont have the mat ,

Abraham i coded all i think good, the think is i cannot remove the mat from coding, i will try to put a seat with mat and see if is working

[Fraizer]

i make the retrofit, do you have in the driver seat the mat sensor ?

many cars dont have this... check your vin for the options