Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Nissan Navara Crankshaft sensor Problem
12-07-2023, 18:48 PM,
Post: #1
|
|||
|
|||
Nissan Navara Crankshaft sensor Problem
Hello Techs,
I have a Nissan Navara D40 2007,YD25. Mechanic was changing the clutch plate and damaged the crankshaft sensor in the process, now I've tried to replace 3 different sensors but the fault for crankshaft sensor keep on coming back anytime I run the engine, I've checked wiring, the flywheel and replaced sensor with a good one from running car but, but the fault persists what else can I check IF YOU ARE SATISFIED THANKS AND REP WILL BE NICE |
|||
12-08-2023, 02:54 AM,
Post: #2
|
|||
|
|||
RE: Nissan Navara Crankshaft sensor Problem
Hi is the car now a non start?
|
|||
12-08-2023, 04:27 AM,
Post: #3
|
|||
|
|||
RE: Nissan Navara Crankshaft sensor Problem
What is the fault code?
|
|||
12-08-2023, 14:34 PM,
Post: #4
|
|||
|
|||
RE: Nissan Navara Crankshaft sensor Problem
I'm not familiar with Nissan
On BMW now there is magnetic ring on back many shops brake magnet during installation of an engine Check for dirt on crank position sensor, Check for metal at the end of crank position sensor, Check size of crank position sensor Check for old O-Ring/gasket for crank position sensor Check for micro cracks CPSensor RESET/Adapt CPSensor via computer Check reading with Voltmeter ( bad sensor is 0~500 and good reading 670~1200 ) Check if Flywheel is bend or missing teeth Check if wires been broken Check your cam sensors, rotate cam sensors, check wiring of cam sensors Unplug MAF sensor, throutlebody, crank engine see if you still get the same codes If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
Reputation: +1 - dabaca [+1] | |||
12-08-2023, 15:04 PM,
Post: #5
|
|||
|
|||
RE: Nissan Navara Crankshaft sensor Problem
It has been a month since he first posted, I would imagine it is fixed or scrapped by now.
He just couldn't be bothered to update the thread. Closed. If someone took the time to help you, the least you can do is take a few seconds and press two buttons!
Thanks + reputation. |
|||
Reputation: +1 - dabaca [+1] | |||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
NISSAN CONSULT3 PASSTHRU DRIVERS VAS5054 | ritadj | 1 | 159 |
28-04-2024, 08:51 AM Last Post: wolfen |
|
nissan micra k12 wont start | coder | 0 | 48 |
14-04-2024, 15:29 PM Last Post: coder |
|
Nissan micra - virgin dump for EPS | bboctavian | 0 | 59 |
05-04-2024, 11:44 AM Last Post: bboctavian |
|
2015 Nissan Rogue missing BCM | koziol | 0 | 51 |
05-04-2024, 00:59 AM Last Post: koziol |
|
Looking for Nissan Consult j2534 | drovid | 5 | 473 |
16-03-2024, 15:01 PM Last Post: domelec |
|
Nissan Qashqai 2019 need cooding | sorin.henea | 1 | 126 |
04-03-2024, 09:05 AM Last Post: xxmatixx |
|
2009 Nissan Sentra Calibration file | koziol | 0 | 64 |
26-02-2024, 16:35 PM Last Post: koziol |
|
Nissan Qashqai no cummunicate with ecm , many fault u1000 | TKservice | 0 | 70 |
23-02-2024, 06:59 AM Last Post: TKservice |
|
Glow plugs values Nissan x-trail t32 dci bad start | AlexM3F80 | 3 | 142 |
23-02-2024, 06:25 AM Last Post: AlexM3F80 |
|
nissan pickup 2005 new key | davito1 | 0 | 47 |
22-02-2024, 17:08 PM Last Post: davito1 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content