Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Siemens PPD 1.5 issue
13-07-2023, 21:42 PM,
Post: #1
|
||||||||||
|
||||||||||
Siemens PPD 1.5 issue
Hello i have siemens ppd 1.5 stage 1 issue if i cheat on NM TO IQ and SOI maps power is good and there is small ammount of black smoke if i change X axis on these maps no black smoke and TQ limits shows over 480 NM DW over 500NM Smoke Limitation goes up to 460NM on about 2K RPM for 1 second and drops to 360NM on and IQ limitation at low rpm shows 69.7MG After 2K RPM goes to 80MG whole RPM and power is bad never had this issue anyone maybe can help with stage 1 i don't wanna to cheat on NM TO IQ maps. Adding ori file and map pack maybe i missing maps or something? Tried with egr off problem is same.
|