[BliZZar911]

Hey friends, I try to read ID at Toyota Avensis D-4D.
Get following answer ecu:

Interface: Tactrix Inc. - OpenPort
2.0 J2534 ISO/CAN/VPW/PWM
DLL: 1.02.4791 Jun  2 2016 12:43:17
Firmware: 1.17.4877
Protocol: Toyota: 76F0004/12/23/38/39/40/70/85, MPC565 K-Line New
Identification
VIN: V
Calibration: 305B3000
Calibration file: 89663-05B30
CVN: 7EA57874
Completed

So I only have kess ori file but I can not flash.
Always get „completed unsuccessfully“

Somebody have a pcmflash flashable ori file for the car?

[bleXER]

Hi,
Check this one

[BliZZar911]

unfortunately without success. i try to write...
after identification always get „completed unsuccessfully


at kess clone i cant read ID. and i cant write the ori file.

[superjet]

use kess read it again

[BliZZar911]

use kess read it again

at kess clone i cant read ID. and i cant write the ori file.
i tried to clean pin 15....but unsuccesful

[CenturionM]

bench? boot mode?


try flashing the map via kess in recovery mode

[BliZZar911]

solved.! KESS Genuine done the job.
thank you ZENTER PERFORMANCE