[PJ_A4B8]

Hi everyone.
Is there anyone able to pull the pin code from the dump on my A4 (03L906022KC) please?


Help would be much appreciated.


Thanks in advance.

[volavka]

Post flash aswell !

[PJ_A4B8]

Post flash aswell !

Oops! 


Here's the flash, eeprom & backup

Thank you...

[volavka]

VIN: WAUZZZ8K49A119603
Pin Code: 52720
CS: 0824B4D921E0E9
MAC: 7E7F3547

[lupu_sandu]

There is no pin for immo5 system.

VIN: WAUZZZ8K49A119603
CS: 7E7F0824B4D921E0E93547F0CDE9A39C
MAC: C4CABE5A

Anyway these dumps are not ok.
Power class is 00 and someone tried to make immo off.

[PJ_A4B8]

There is no pin for immo5 system.

VIN: WAUZZZ8K49A119603
CS: 7E7F0824B4D921E0E93547F0CDE9A39C
MAC: C4CABE5A

Anyway these dumps are not ok.
Power class is 00 and someone tried to make immo off.

Wow! It's at this point I have to admit to my lack of knowledge in this area. I was a fully skilled mechanic years ago, but left the trade at about the time that everything went ecu!
If I tell you what happened, I'm hoping that you may be able to shed light on the problem. My engine ecu failed from water ingress (03L906022KC). A4 B8 Tdi 170 CAHA. I managed to get my hands on a garuanteed ecu (I heard the engine running, scanned the car, no faults anywhere). So I was sure of the ecu. I managed to get a backup, eeprom and flash from the failed ecu, and cloned it using ktag. 

The car will not start and shows "SAFE" on the cluster. I read up on it, and eventually got advice from someone on MHH Auto to use the Immo Off software, which would then give me the ability to start the car. The fact that we are here tells you that did not work. I'm impressed that you obviously new I had done that.

Are you able to throw some light on my problem? It goes without saying that I would be in your debt.

Look forward to hearing from you. And thank you for responding to my call for help.

PJ.

[ROD-BENDERS]

There is no pin for immo5 system.

VIN: WAUZZZ8K49A119603
CS: 7E7F0824B4D921E0E93547F0CDE9A39C
MAC: C4CABE5A

Anyway these dumps are not ok.
Power class is 00 and someone tried to make immo off.

Wow! It's at this point I have to admit to my lack of knowledge in this area. I was a fully skilled mechanic years ago, but left the trade at about the time that everything went ecu!
If I tell you what happened, I'm hoping that you may be able to shed light on the problem. My engine ecu failed from water ingress (03L906022KC). A4 B8 Tdi 170 CAHA. I managed to get my hands on a garuanteed ecu (I heard the engine running, scanned the car, no faults anywhere). So I was sure of the ecu. I managed to get a backup, eeprom and flash from the failed ecu, and cloned it using ktag. 

The car will not start and shows "SAFE" on the cluster. I read up on it, and eventually got advice from someone on MHH Auto to use the Immo Off software, which would then give me the ability to start the car. The fact that we are here tells you that did not work. I'm impressed that you obviously new I had done that.

Are you able to throw some light on my problem? It goes without saying that I would be in your debt.

Look forward to hearing from you. And thank you for responding to my call for help.

PJ.

Write the files back that came with the ecu... these have otp blocks or areas where you cannot simply write other ecu files between ecus anymore.

make immo off eprom first with med17x immo tool found here
https://cartechnology.co.uk/showthread.php?tid=76578

If car wont start.. then make flash immo off...  and disable dtc p1570 and try again.

Br

[lupu_sandu]

Post files from your ORI and SH ecu.
I can transfer immo without a problem

[PJ_A4B8]

Post files from your ORI and SH ecu.
I can transfer immo without a problem

These are the files from the original damaged ecu and the donor.

Thanks for the offer of help, much appreciated...

[lupu_sandu]

Put this eeprom in your SH ECU.
Also, put back flash from SH aswell.