[jn_junior4]

Hi guys,

i try to flash the bcm 6R0937097M to the newest softwarestack via vcp. But it doesen't work - i need a login code...

Every login code i found, doesn't work

Have someone an idea?

Thanks in advance...

[audi666]

Are you sure you wrote the correct P/N ?

[jn_junior4]

Are you sure you wrote the correct P/N ?

Oh , my mistake: 06R 937 087M

[nirvananils]

For flash you never need a login

[jn_junior4]

For flash you never need a login

Mmh, i try it with vcp. But i always get a mistake: no key value and than my try is aborted

[audi666]

That P/N does not exist.

[oscar89]

He probably meant 6R0 937 087 M, which is bcm for polo 6r pq25. The error you get is probably seed/key error, which means the sw is not compatible. If you want to flash anyway (not smart move), you might need to edit frf/odx file + eeprom of bcm

[jn_junior4]

He probably meant 6R0 937 087 M, which is bcm for polo 6r pq25. The error you get is probably seed/key error, which means the sw is not compatible. If you want to flash anyway (not smart move), you might need to edit frf/odx file + eeprom of bcm

Yes, you are right - good man , i want so flash a sw from the T5 bcm, because of the cruise control. The bcm's seems so be similar... but of couse, it would be to easy to flash it from another car...

but that's the explanation for my problem..

Can somebody explain me the other way with edit frf/odx? Or ist this to difficult to explain?

Sorry for my late answer