Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMWAi Coder & Tools 2.24
23-06-2015, 20:03 PM,
Post: #21
|
|||
|
|||
RE: BMWAi Coder & Tools 2.24
I have F series NBT in a E9x can i use this software to code the nbt?
|
|||
23-06-2015, 20:47 PM,
Post: #22
|
|||
|
|||
RE: BMWAi Coder & Tools 2.24
Very interesting tool,
does it make Video in motion, Digital speedometer and Read video from USB? thank you, Regards |
|||
24-06-2015, 05:09 AM,
(This post was last modified: 24-06-2015, 05:17 AM by snzdl.)
Post: #23
|
|||
|
|||
RE: BMWAi Coder & Tools 2.24
(23-06-2015, 20:03 PM)corpus Wrote: I have F series NBT in a E9x can i use this software to code the nbt? Sorry, it will only work on the F Series. (23-06-2015, 20:47 PM)moronga Wrote: Very interesting tool, Yes, these items you listed are possible, but ,the last one only NBT supported. |
|||
24-06-2015, 08:09 AM,
Post: #24
|
|||
|
|||
RE: BMWAi Coder & Tools 2.24
Hello!
I tested the App and it works like it should be. It's like coding for dummies. Okay, the translation is not the best and it would be perfect if it would be possible to change the language. If it necessary I would help for the translation f.e. into the German language. Only the new NBT2 cannot be coded with the tool. CU Oliver |
|||
24-06-2015, 11:10 AM,
Post: #25
|
|||
|
|||
RE: BMWAi Coder & Tools 2.24
(24-06-2015, 08:09 AM)milkyway Wrote: Hello! I admit that the language was my weaknesses. I'm working on version 3.1, after the completion of I hope to get your help. NBT2 not yet released in China, so I can not support it now. but if you can provide a list of ECUs, maybe I can advance research. Thanks! |
|||
24-06-2015, 12:49 PM,
Post: #26
|
|||
|
|||
RE: BMWAi Coder & Tools 2.24
(24-06-2015, 11:10 AM)snzdl Wrote:(24-06-2015, 08:09 AM)milkyway Wrote: Hello! If is the NBT2 you said it "HU-H2"?, if yes,it connected the TCB2 with OABR(2-wire Ethernet,200Mbit/s),and was introduced when F23(2-series Convertible) was launched. |
|||
24-06-2015, 23:04 PM,
Post: #27
|
|||
|
|||
RE: BMWAi Coder & Tools 2.24
So i tried using this tool and i wasn't able to establish a connection
is the default IP address and settings correct? |
|||
25-06-2015, 01:29 AM,
Post: #28
|
|||
|
|||
RE: BMWAi Coder & Tools 2.24
(24-06-2015, 11:10 AM)snzdl Wrote:Hi Snzdl(24-06-2015, 08:09 AM)milkyway Wrote: Hello! Great tool, saves a lot of time In case you need i can provide you FA, SVT and CAFD files... I have been coding about 20 cars/months and most of them produced after nov/14. |
|||
25-06-2015, 03:48 AM,
(This post was last modified: 25-06-2015, 03:53 AM by snzdl.)
Post: #29
|
|||
|
|||
RE: BMWAi Coder & Tools 2.24
(25-06-2015, 01:29 AM)gfriedrichi Wrote: Hi Snzdl There is a "Save" button on the main screen, click on it to keep a list , and provide it to me. I'll finish the rest. Thanks! (24-06-2015, 23:04 PM)corpus Wrote: So i tried using this tool and i wasn't able to establish a connection Maybe you should check your firewall, maybe it prohibits the app to access the network. Good luck! |
|||
25-06-2015, 16:15 PM,
Post: #30
|
|||
|
|||
RE: BMWAi Coder & Tools 2.24
(25-06-2015, 03:48 AM)snzdl Wrote:Done, datasheet and cafd.txt(25-06-2015, 01:29 AM)gfriedrichi Wrote: Hi Snzdl |