Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Peugeot partner II-cruise control retrofit
16-06-2015, 08:19 AM,
Post: #1
PPeugeot  Peugeot partner II-cruise control retrofit
Hello friendshi
Because of this topicdevil, I wrote a thread againwait

http://cartechnology.co.uk/showthread.php?tid=6928

I need your help,a few days ago I installed cruise control stalk in a car of my brother. Its a 1.6 hdi, year 2007, 90ps.. Everything fits fine, then I started programming with diagbox,peugeot planet 2000
-First in engine ECU; (presence and type of cruise control-with cruis control1 and without speed limiter)The car does not have display of the speed selected on the instrument panel or on the multifunction display!!
-Then BSI;cruise control present
Then I checked in switching module below steering wheel standard parameter measurement, everything is ok;
cruise control on-of, increase switch, decrease switch, pause..all changes with the switchinghappy
Also checked parameter measurements for brake and clutch switch (BSI)..pressed,releasedhappy
Then I drove in 4 and 5 gear over 90-120 km/h..
But cruise control STILL WONT WORKsad
Did I miss something, please help?
All described are in pictures bellowunder
Thankyouhi


Attached Files Thumbnail(s)
                   

Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply
17-06-2015, 19:26 PM,
Post: #2
RE: Peugeot partner II-cruise control retrofit
Hi how many wires are there on brake switch?
if 4 wires please check to see physically the the number of contacts inside the brake switch
Quote this message in a reply
[+] 2 users say Thank You to Vish for this post
18-06-2015, 10:09 AM,
Post: #3
RE: Peugeot partner II-cruise control retrofit
There are 4 wires on brake switch, also I checked ,there are 4 pins inside brake switchspeechlessthink

Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply
18-06-2015, 18:51 PM,
Post: #4
RE: Peugeot partner II-cruise control retrofit
Possibility of brake switch being incorrect (normally open and normally closed contacts in them)
please try this with caution!!!
find the two wires for the brake lights on the switch(one live input and one output to the lamps)
ignore these wires.
the other two wires bridge it out manually.
test drive vehicle.and deactivate cruise control manually using cancel button if it works.
Quote this message in a reply
[+] 2 users say Thank You to Vish for this post
19-06-2015, 15:22 PM,
Post: #5
RE: Peugeot partner II-cruise control retrofit
Hi
this may sound daft but did you click on the F5 and save before exit. If that dont work please consider the other menu in Diagbox , I think its called new vehicle preparation, this allows you to perform upgrades. Installing the Cruise Control if not factory installed can be deemed to be an upgrade.

There is a helpful user doc, that will assist from Scary mistakes links.

Good Luck
UniquePug
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
PPeugeot BSI Peugeot 5008 Abu Ameer 2 172 02-02-2024, 08:41 AM
Last Post: apol
PPeugeot Peugeot 308 2012 1.6 hdi 68kw service manual and wiring diagram boki 1 213 12-01-2024, 14:07 PM
Last Post: windy1603
PPeugeot NEED BSI WIRING DIAGRAM PEUGEOT PARTNER 1.6 BLUEHDI 2016 ToolSet 0 135 06-01-2024, 16:50 PM
Last Post: ToolSet
  Peugeot 308 T9 Automatic gearbox wiring min2xx 0 121 06-01-2024, 09:48 AM
Last Post: min2xx
  need wiring diagram for peugeot 308 2018 diesel TKservice 1 136 04-01-2024, 22:12 PM
Last Post: Liteace
PPeugeot VIN Check Please peugeot boki 0 121 04-12-2023, 18:57 PM
Last Post: boki
  Peugeot Partner Window problem emifive 1 211 20-11-2023, 15:22 PM
Last Post: emifive
PPeugeot BSI PEUGEOT 9651041480 LEAR Fabio 6 384 16-11-2023, 22:20 PM
Last Post: Fabio
  2011 Peugeot 207 1.4 hdi ECU update for P1490 fix jamesworts 5 440 13-09-2023, 21:06 PM
Last Post: jamesworts
PPeugeot Retrofit SMEG IV2 in a 208 with SMEG crazyrs6 0 217 10-09-2023, 11:48 AM
Last Post: crazyrs6

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content