Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Peugeot 307 dashboard pinout
03-08-2023, 08:34 AM,
Post: #1
|
|||
|
|||
Peugeot 307 dashboard pinout
Hi all,
What is pinout for this cluster?? Need only for turn on cluster... Model is SAGEM 21651870-3 P9654485280 A01 JCAE-CMB-T5C3-CEM00 Ok jack have only 12 wires connected (space for pins 5/6/7/11/12/14 was empty) The cluster is from Peugeot 307 1.6 hdi from 2006 If my post helps, give Reputation Thanks
|
|||
03-08-2023, 09:12 AM,
Post: #2
|
|||
|
|||
RE: Peugeot 307 dashboard pinout
I think it's the brown wire, pin16 +, check with multimeter on harness side for voltage when you switch on ignition
|
|||
03-08-2023, 09:40 AM,
(This post was last modified: 03-08-2023, 09:48 AM by liviu2004.)
Post: #3
|
|||
|
|||
RE: Peugeot 307 dashboard pinout
Fuse supply could be pin 6 and minus could be pin 16. But its difficult to check wiring diagrams without an rpo number.
Communication lines seem to be at pins 3 and 5 with BSI. |
|||
03-08-2023, 09:53 AM,
Post: #4
|
|||
|
|||
RE: Peugeot 307 dashboard pinout
Pin 8 GND pin 9 positive. But this dash go on from VAN not with plus from terminal 15.
|
|||
03-08-2023, 09:56 AM,
Post: #5
|
|||
|
|||
RE: Peugeot 307 dashboard pinout
(03-08-2023, 09:53 AM)tpetrov Wrote: Pin 8 GND pin 9 positive. But this dash go on from VAN not with plus from terminal 15. No need 2 positive?? If my post helps, give Reputation Thanks
|
|||
03-08-2023, 10:04 AM,
Post: #6
|
|||
|
|||
RE: Peugeot 307 dashboard pinout
|
|||
Reputation: +1 - dabaca [+1] | |||
03-08-2023, 10:14 AM,
Post: #7
|
|||
|
|||
RE: Peugeot 307 dashboard pinout
(03-08-2023, 09:53 AM)tpetrov Wrote: Pin 8 GND pin 9 positive. But this dash go on from VAN not with plus from terminal 15.No work with this 2 wire....8 gnd and 9 positive If my post helps, give Reputation Thanks
|
|||
03-08-2023, 11:09 AM,
Post: #8
|
|||
|
|||
RE: Peugeot 307 dashboard pinout
(03-08-2023, 10:14 AM)dani3lxxl Wrote:My friend, did you understand what I wrote to you?(03-08-2023, 09:53 AM)tpetrov Wrote: Pin 8 GND pin 9 positive. But this dash go on from VAN not with plus from terminal 15.No work with this 2 wire....8 gnd and 9 positive I said that these are the power supplies, but in order for the dashboard to light up, you need a signal on the VAN bus from BSI module. How can I explain it to you more clearly? |
|||
03-08-2023, 11:13 AM,
Post: #9
|
|||
|
|||
RE: Peugeot 307 dashboard pinout
tpetrov says wake up signal comes from comms with BSI. If you don’t have bsi you cannot easily turn on this dash.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Smart 451 2007 Dashboard with wrong VIN | arcelik | 0 | 22 |
10-05-2024, 10:17 AM Last Post: arcelik |
|
Dashboard Flash Backup Files collection | volavka | 33 | 30,527 |
06-05-2024, 21:01 PM Last Post: dj_jormi |
|
Mini Cooper F56 dashboard virgin | Valery63 | 0 | 47 |
01-05-2024, 19:51 PM Last Post: Valery63 |
|
MB W253 Dashboard recover | marnpl | 3 | 145 |
28-04-2024, 18:54 PM Last Post: W211 |
|
Citroen C4 dash P9664319880 need pinout | pinotec | 5 | 110 |
24-04-2024, 13:51 PM Last Post: al70 |
|
Honda Varadero 125 2005 year - need dash power pinout | slevy70 | 0 | 31 |
24-04-2024, 10:51 AM Last Post: slevy70 |
|
peugeot partner jci bsi 95128 mileage | ILDIRA | 1 | 47 |
23-04-2024, 11:55 AM Last Post: dabaca |
|
Smart 451 Brabus used dashboard install | rochenlebelle | 0 | 40 |
22-04-2024, 17:13 PM Last Post: rochenlebelle |
|
Correction Dsh+Bsi Peugeot 206+ | mouatez | 1 | 59 |
18-04-2024, 12:12 PM Last Post: renia1983 |
|
Peugeot partner dash pinout | al70 | 5 | 183 |
07-04-2024, 15:38 PM Last Post: al70 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content