[Supertramp78]

Hi folks,
I upgraded my 07 Allroad with facelift components
Gateway 0058
BEM
Alternator
Cluster 932s 0214
Lane assist
ACC

When i switch to ACC view in my cluster you can see that I was able to enable the additional lane assist lines.
They show up as soon as the camera recognizes the lines on the street.

On the 4F this is disabled from the factory but I found undocumented coding to enable them.

Now I want to have dynamic lines on the display like on the other picture.
Audi implemented dynamic lines on the cluster for the lane assist only in the A4 and A5. No idea why.

The lane assist camera of A4/A5 and A6 4F are the same part number. Just different software.

Since my cluster can display the white lines, I assume that the cluster actually does have this feature.

Question is if it is possible to enable the dynamic lines in the 4F

[liviu2004]

Is it an idea to flash camera with software of A5?

[Supertramp78]

Is it an idea to flash camera with software of A5?

I actually just bought one from a A5

I did some research. In the A5 cluster you need to code byte 4 bit 6 and byte 11 bit 1

On the 4F cluster there is no byte 11 for lane assist information.

Whats the latest software for the facelift clusters?
I heared there is a newer one than 0214

[liviu2004]

What software number and version has the cluster now?

[Supertramp78]

What software number and version has the cluster now?

4F0920933P
0214
H08

---

What software number and version has the cluster now?

4F0920933P
0214
H08

[liviu2004]

I see no software for this cluster in what is online available, so you're stuck on the software side of this dash.