Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to
[email protected]
Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
04-08-2023, 20:36 PM,
|
|
CenturionM
Donator
|
Posts: 780 Threads: 310
Threads: 310
Thanks Received: 1,061 in 323 posts
Thanks Given: 301
Joined: Jan 2023
Reputation:
966
|
|
RE: Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
(04-08-2023, 19:15 PM)roanoke Wrote: Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
need original dump or map fix
HW: BB5A-12B684-AC
SW: CM5A-12A650-AMK
The problem is that, first of all, the car started jerking, breaking off at idle. Between 1000rpm and 3000rpm the car breaks up, jerks. Above 3000rpm the car drives and accelerates well. Although I can see that it has lost some power. Everything (mechanically, sensors, etc.) has been checked in the car, only the engine controller map remains. The power was raised, but something spilled out and the car jerks at idle. I am asking for the original map or map correction. Once I test it and everything is ok, then I can pay for the help.
BEST REGARDS
look this
required rep +1 and thanx
pass pm
like my post and the content i share, give me a +1 recommendation and a thanks = +
|
Reputation: +1 - roanoke [+1] |
|
The following 1 user says Thank You to CenturionM for this post:1 user says Thank You to CenturionM for this post
• roanoke
|
Messages In This Thread |
RE: Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION - by CenturionM - 04-08-2023, 20:36 PM
|
Users browsing this thread:
1 Guest(s)
Return to TopReturn to Content