Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
04-08-2023, 19:15 PM,
Post: #1
Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION



need original dump or map fix

HW: BB5A-12B684-AC

SW: CM5A-12A650-AMK

The problem is that, first of all, the car started jerking, breaking off at idle. Between 1000rpm and 3000rpm the car breaks up, jerks. Above 3000rpm the car drives and accelerates well. Although I can see that it has lost some power. Everything (mechanically, sensors, etc.) has been checked in the car, only the engine controller map remains. The power was raised, but something spilled out and the car jerks at idle. I am asking for the original map or map correction. Once I test it and everything is ok, then I can pay for the help.


BEST REGARDS


Attached Files
Focus ST 2.0 250hp EcoBust.rar
File Type: .rar
Downloaded: 4 times
Size: 73.38 KB

Quote this message in a reply
04-08-2023, 20:13 PM,
Post: #2
RE: Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
when someone raises the power, he does not immediately notice that this is happening
Quote this message in a reply
04-08-2023, 20:31 PM,
Post: #3
RE: Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
(04-08-2023, 20:13 PM)wajda3 Wrote:  when someone raises the power, he does not immediately notice that this is happening

and what now? How to undo it? correct? To correct? How can you help?
Quote this message in a reply
04-08-2023, 20:36 PM,
Post: #4
RE: Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
(04-08-2023, 19:15 PM)roanoke Wrote:  Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION



need original dump or map fix

HW: BB5A-12B684-AC

SW: CM5A-12A650-AMK

The problem is that, first of all, the car started jerking, breaking off at idle. Between 1000rpm and 3000rpm the car breaks up, jerks. Above 3000rpm the car drives and accelerates well. Although I can see that it has lost some power. Everything (mechanically, sensors, etc.) has been checked in the car, only the engine controller map remains. The power was raised, but something spilled out and the car jerks at idle. I am asking for the original map or map correction. Once I test it and everything is ok, then I can pay for the help.


BEST REGARDS

look this

required rep +1 and thanx


pass pm

like my post and the content i share, give me a +1 recommendation and a thanks = [Image: postbit_reputation.gif] [Image: tyl_add.png]
Reputation: +1 - roanoke [+1]
Quote this message in a reply
[+] 1 user says Thank You to CenturionM for this post
05-08-2023, 10:27 AM,
Post: #5
RE: Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
I uploaded the following files:

- Ford_Focus_2_0ST_2012___184KWKW_Bosch____A344_Stage_1
- Ford_Focus_2_0ST_2012___184KWKW_Bosch____ED87_Original
- Ford_Focus_ST_2_0_T_2013___183_9KWKW_Bosch____03D0_stage_1_6037_ols_+_chksm

The CHK option is always selected.

(I haven't tested the others)

After each file there is a problem, the engine does not start and displays the error: "Engine malfunction Service now!"
And I have to use the RECOVER function and the original file every time.

I should add that I am new to this field. I do not know what's going on?
Something wrong with checksum?? Im newbe.


Please help.


Attached Files Thumbnail(s)
   
Quote this message in a reply
05-08-2023, 10:40 AM,
Post: #6
RE: Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
(05-08-2023, 10:27 AM)roanoke Wrote:  I uploaded the following files:

- Ford_Focus_2_0ST_2012___184KWKW_Bosch____A344_Stage_1
- Ford_Focus_2_0ST_2012___184KWKW_Bosch____ED87_Original
- Ford_Focus_ST_2_0_T_2013___183_9KWKW_Bosch____03D0_stage_1_6037_ols_+_chksm

The CHK option is always selected.

(I haven't tested the others)

After each file there is a problem, the engine does not start and displays the error: "Engine malfunction Service now!"
And I have to use the RECOVER function and the original file every time.

I should add that I am new to this field. I do not know what's going on?
Something wrong with checksum?? Im newbe.


Please help.

apparently these solutions do not fit this ecu

send me a picture of the driver - ecu driver plaques

like my post and the content i share, give me a +1 recommendation and a thanks = [Image: postbit_reputation.gif] [Image: tyl_add.png]
Quote this message in a reply
05-08-2023, 10:52 AM,
Post: #7
RE: Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
Can you tell where it is located? I can't find it in the car.
Quote this message in a reply
05-08-2023, 10:54 AM, (This post was last modified: 05-08-2023, 11:32 AM by CenturionM.)
Post: #8
RE: Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
(04-08-2023, 19:15 PM)roanoke Wrote:  Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION



need original dump or map fix

HW: BB5A-12B684-AC

SW: CM5A-12A650-AMK

The problem is that, first of all, the car started jerking, breaking off at idle. Between 1000rpm and 3000rpm the car breaks up, jerks. Above 3000rpm the car drives and accelerates well. Although I can see that it has lost some power. Everything (mechanically, sensors, etc.) has been checked in the car, only the engine controller map remains. The power was raised, but something spilled out and the car jerks at idle. I am asking for the original map or map correction. Once I test it and everything is ok, then I can pay for the help.


BEST REGARDS

try this

same password

mate, write me if everything works fine because while I'm here I'd like to know, I'm going to the lake and I'll be late in the evening


Attached Files
Ford-Mazda_med17_STAGE1_focus-250_modified_noCS_chk_ok.rar
File Type: .rar
Downloaded: 2 times
Size: 73.46 KB


like my post and the content i share, give me a +1 recommendation and a thanks = [Image: postbit_reputation.gif] [Image: tyl_add.png]
Quote this message in a reply
05-08-2023, 11:53 AM,
Post: #9
RE: Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
The file uploaded, the engine started now.

However, the situation is the same:
- engine revs fluctuate at idle
- 1000-3000rpm's engine jerks
- above 3000 stops jerking and accelerates almost normal.
- every now and then he shoots from the exhaust (probably floods it)

I might add that I noticed

*the car started to smoke more,
* lost a bit of power in general, before the problem appeared it was better.

- the turbine is after regeneration
- no DTCs
- lambda OK
- new HQ spark plugs
- new HQ coils
- catalytic converter removed.


Actual data from the latest ForScan:
+ (IATS2) Intake air temperature sensor 2 -40st C
+ (AAT) Ambient air temperature -40st C (...but on DASHBOARD it's OK).
As far as I know, these sensors have no effect on engine operation.
+ other sensors OK
Quote this message in a reply
05-08-2023, 11:59 AM,
Post: #10
RE: Ford Focus ST 250HP 2.0 2012 - NEED ORYGINAL DUMP or MAP FIX CORRECTION
(05-08-2023, 11:53 AM)roanoke Wrote:  The file uploaded, the engine started now.

However, the situation is the same:
- engine revs fluctuate at idle
- 1000-3000rpm's engine jerks
- above 3000 stops jerking and accelerates almost normal.


I might add that I noticed

*the car started to smoke more,
* lost a bit of power in general, before the problem appeared it was better.

- the turbine is after regeneration
- no DTCs
- it's okay
- new HQ spark plugs
- new HQ coils
- catalytic converter removed.


Actual data from the latest ForScan:
+ (IATS2) Intake air temperature sensor 2 -40st C
+ (AAT) Ambient air temperature -40st C (...but on DASHBOARD it's OK).
As far as I know, these sensors have no effect on engine operation.
+ other sensors OK

It's obviously a mechanical problem, something just fell off

maybe the turbine is badly regenerated and just fell

as you regenerate the turbine, it is worth converting it to a hybrid for the same price and do stage 2

check piston compression

check injectors / injectors may pour too much (broken injector)

blow smoke into the intake system to see if it catches the left air

put on decent spark plugs, for example BRISK dedicated to sport

check the throttle and intake system

maybe something broke somewhere

we call it Ford - FORD-MIORTF dead smile

like my post and the content i share, give me a +1 recommendation and a thanks = [Image: postbit_reputation.gif] [Image: tyl_add.png]
Reputation: +1 - roanoke [+1]
Quote this message in a reply
[+] 1 user says Thank You to CenturionM for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  Megan 2 2.0 EDC 16cp33 eprom dump need galisdoo 1 49 7 hours ago
Last Post: galisdoo
PPeugeot peugeot 207 1.4ess 2012 Valeo V34.1 dcat anour10 2 188 26-03-2024, 11:42 AM
Last Post: anour10
  Ford Delphi 4T11-12A650-CB EGR tihiuvek 2 43 25-03-2024, 18:56 PM
Last Post: tihiuvek
  2012 BT-50/Ranger 3.2 SID208. Stage 1 to stage 2 on the fly? sparky001 0 34 25-03-2024, 04:34 AM
Last Post: sparky001
LFord Ford C-Max 2008 help needed mini1.3 1 55 23-03-2024, 01:12 AM
Last Post: kreepyme
LFord Ford cmax edc17c70 dtc off Arq1983 1 44 22-03-2024, 19:50 PM
Last Post: rece1p23
  Clear DTC Visteon Ford mondeo 2.0 jeam 0 49 19-03-2024, 08:21 AM
Last Post: jeam
LFord Help error Ford Mondeo V 20tdci Delphi DCM61 bmw320d 2 77 18-03-2024, 18:42 PM
Last Post: bmw320d
  Ford Transit. 2.4 138HP VISTEON DCU10x stage 1needed iTudor 0 52 18-03-2024, 16:11 PM
Last Post: iTudor
  Ford Forcus Bosch MED17.2.2 DTC P0420 Leon703 1 63 15-03-2024, 19:36 PM
Last Post: desperado4161

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content