Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

520D G30 - Remove SCR from ISTA
06-08-2023, 16:55 PM,
Post: #1
XZBMW  520D G30 - Remove SCR from ISTA
Hello!
How i can remove SCR control unit from control units tree after AdBlue off?
Thank you!

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation if I helped you.
Quote this message in a reply
06-08-2023, 17:27 PM,
Post: #2
RE: 520D G30 - Remove SCR from ISTA
In esys save SVT and in SVT editor delete from it SCR unit and save.
Then upload new SVT in VCM as SVT target (expert mode - VCM - SVT Target then master - write SVT target).
In options-settings-options check update VCM after TAL execution and code any unit.
Quote this message in a reply
[+] 1 user says Thank You to mr_nitroz for this post
06-08-2023, 17:40 PM,
Post: #3
RE: 520D G30 - Remove SCR from ISTA
Just add $161 to FA and unplug SCR ECU or fuses. In some cars when you add 161 you can flash DDE with EU5 specific firmware and SCR will be deleted by original firmware. Just look what ESYS calculate after change FA to EU5.


BMW Swap Garage & Service
Quote this message in a reply
[+] 5 users say Thank You to SkeYT for this post
06-08-2023, 18:41 PM,
Post: #4
RE: 520D G30 - Remove SCR from ISTA
(06-08-2023, 17:40 PM)SkeYT Wrote:  Just add $161 to FA and unplug SCR ECU or fuses. In some cars when you add 161 you can flash DDE with EU5 specific firmware and SCR will be deleted by original firmware. Just look what ESYS calculate after change FA to EU5.
using this method you can remove adblue on f series without chip tuning
Quote this message in a reply
[+] 1 user says Thank You to VroomVroom for this post
07-08-2023, 12:02 PM,
Post: #5
RE: 520D G30 - Remove SCR from ISTA
Does this method work in G series?
Quote this message in a reply
07-08-2023, 16:21 PM,
Post: #6
RE: 520D G30 - Remove SCR from ISTA
(07-08-2023, 12:02 PM)lagunasec Wrote:  Does this method work in G series?

Would this also have effect for example for defective NOx sensors? Would it make errorcodes for those dissapear also if flashed with 161 sw?

- Remote coding & programming - F 8HP45/50/70/75 ISN reset remote
- Remote ECU tuning MEVD17 + EDC17 + MGD1 ECUS + 8HP EGS BMW/MINI
- M2/M3/M4 CS OR GTS Flash -
 8HP 
Alpina EGS flash F & G remote
- EVO ID4 to ID6 flash - Apple Carplay activation

Skype: live:fatalix - Whatsapp: PM for details
Quote this message in a reply
07-08-2023, 17:39 PM,
Post: #7
RE: 520D G30 - Remove SCR from ISTA
(07-08-2023, 16:21 PM)Fatalix Wrote:  
(07-08-2023, 12:02 PM)lagunasec Wrote:  Does this method work in G series?

Would this also have effect for example for defective NOx sensors? Would it make errorcodes for those dissapear also if flashed with 161 sw?

This doesnt work on G serries smile for SCR delete (flash to EU5)

BIMMERWORKS
Quote this message in a reply
08-08-2023, 11:33 AM,
Post: #8
RE: 520D G30 - Remove SCR from ISTA
(07-08-2023, 17:39 PM)marcdts Wrote:  
(07-08-2023, 16:21 PM)Fatalix Wrote:  
(07-08-2023, 12:02 PM)lagunasec Wrote:  Does this method work in G series?

Would this also have effect for example for defective NOx sensors? Would it make errorcodes for those dissapear also if flashed with 161 sw?

This doesnt work on G serries smile for SCR delete (flash to EU5)


it's possible to deactivate SCR by flashing G series to EU5 but firstly you need to reset mth

FSC DEALER
*Repair FSC/Repair Pack
*Kafas 2, Kafas 4 MRR SLI FSC,Virgin 
*MGU Region change FSC
*MGU, EVO, EntryEVO CARPLAY with/without telematics
*NCD 2.0 Service
*HU ID8 JOY region change SFA
Whatsapp: +48574180840
Quote this message in a reply
[+] 1 user says Thank You to OBDSolutions for this post
09-08-2023, 06:38 AM,
Post: #9
RE: 520D G30 - Remove SCR from ISTA
(08-08-2023, 11:33 AM)OBDSolutions Wrote:  it's possible to deactivate SCR by flashing G series to EU5 but firstly you need to reset mth

That's interesting. What are you referring to by "mth"?

EntryNav2, MGU, Evo - carplay with or without ATM, full fsc, component protection and more.
NCD 2.0 secure coding - typeschlussel (typecode) change, region change
under Press rep & thanks if I you found this useful. PM if you need more help.
Quote this message in a reply
09-08-2023, 07:28 AM,
Post: #10
XZBMW  RE: 520D G30 - Remove SCR from ISTA
(09-08-2023, 06:38 AM)jb2005 Wrote:  
(08-08-2023, 11:33 AM)OBDSolutions Wrote:  it's possible to deactivate SCR by flashing G series to EU5 but firstly you need to reset mth

That's interesting. What are you referring to by "mth"?

motor hours?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 33 2,970 3 hours ago
Last Post: Siki78
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,648 627,548 5 hours ago
Last Post: Sedoy
  ista for use whit vcx se db8000 0 36 7 hours ago
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 329 Today, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,316 Yesterday, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,455 Yesterday, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 125 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 157 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 666 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,479 24-03-2024, 23:45 PM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content