Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
G05 - Kafas4: 025D0B -control unit not coded for the vehicle
07-01-2023, 10:56 AM,
Post: #11
|
|||
|
|||
RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle
(07-01-2023, 09:29 AM)CEBEP Wrote: Just code kafas with default car FA KAFAS coded to the original VO - nothing changes, the error remains If I helped you, press "Thanks" + Rep
|
|||
07-01-2023, 10:59 AM,
(This post was last modified: 07-01-2023, 10:59 AM by Node.)
Post: #12
|
|||
|
|||
RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle
At this point I think you should provide us with the FA you are using (including VIN). KAFAS part # could be useful too. Else it feels this thread has become pointless.
|
|||
07-01-2023, 11:35 AM,
(This post was last modified: 12-01-2023, 15:55 PM by Semi14.)
Post: #13
|
|||
|
|||
RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle
(07-01-2023, 10:59 AM) Node Wrote: At this point I think you should provide us with the FA you are using (including VIN). KAFAS part # could be useful too. Else it feels this thread has become pointless. I am sending the FA and SVT_IST in the attachment If I helped you, press "Thanks" + Rep
|
|||
07-01-2023, 11:49 AM,
(This post was last modified: 07-01-2023, 11:50 AM by Node.)
Post: #14
|
|||
|
|||
RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle
I see you have 5AC. Since 19-07 firmware you MUST HAVE FSC for it. Do you have it installed and accepted? I wonder if that is your issue all along...
Extract from ISTA notes: 4.2 * NEW * High beam assistant - activation code Technical Campaign when programming to 19-07 Fault description: For programming to S18A-19-07-5xx or S15A-19-07-5xx, an activation code Technical Campaign for the KAFAS control unit is scheduled. The reason is that the function is activated retrospectively for the customer. Model series affected: G05, G07, G14, G15, G20, G29 and G11, G12 vehicles, as of life cycle impulse with special equipment 5AC. Measure / Workaround: Import the activation code into the vehicle Fault corrected by: Affects vehicles with version before July 2019. Affected application: ISTA 4 |
|||
07-01-2023, 16:39 PM,
Post: #15
|
|||
|
|||
RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle
(07-01-2023, 11:49 AM)Node Wrote: I see you have 5AC. Since 19-07 firmware you MUST HAVE FSC for it. Do you have it installed and accepted? I wonder if that is your issue all along... Ok. I will check and let you know If I helped you, press "Thanks" + Rep
|
|||
10-01-2023, 20:03 PM,
Post: #16
|
|||
|
|||
RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle
code Kafas with eu typcode
FSC DEALER
*Repair FSC/Repair Pack *Kafas 2, Kafas 4 MRR SLI FSC,Virgin *MGU Region change FSC *MGU, EVO, EntryEVO CARPLAY with/without telematics *NCD 2.0 Service *HU ID8 JOY region change SFA Whatsapp: +48574180840 |
|||
11-01-2023, 14:20 PM,
Post: #17
|
|||
|
|||
RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle
I ran into a similar problem, as a result, when the telematics unit was recoded by the native fa, the error in kafas disappeared
|
|||
12-01-2023, 15:26 PM,
Post: #18
|
|||
|
|||
RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle
FSC codes were not the problem. The problem was the FLM module which was recoded for Europe
If I helped you, press "Thanks" + Rep
|
|||
14-02-2023, 10:48 AM,
Post: #19
|
|||
|
|||
RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle
Sorry for returning back this thread, but on every KAFAS4 MID with lower than CAFD_00004101_012_004_003, if you try something to change by FDL Coding, you will trigger the error: "Kafas control unit not coded for the vehicle".
I think it is not a very clear solution for this issue. |
|||
31-01-2024, 21:40 PM,
Post: #20
|
|||
|
|||
RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle
(14-02-2023, 10:48 AM)Yah Wrote: Sorry for returning back this thread, but on every KAFAS4 MID with lower than CAFD_00004101_012_004_003, if you try something to change by FDL Coding, you will trigger the error: "Kafas control unit not coded for the vehicle". Hello. I have same the problem like as topic starter. Now I have CAFD_00004101_012_004_003 and CAFD_00004102_013_005_004 cafds. What can you recommend to solve the problem? Just update? |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
E60 DSC unit, Cruise+brake vs ACC2 stop and go | GoNz0- | 1 | 57 |
8 hours ago Last Post: Stratofortress |
|
G05 KAFAS4 enable code missing after Retrofit ACC | 6ergsm | 19 | 2,296 |
26-03-2024, 12:33 PM Last Post: Hodgsonp |
|
Adding a new vehicle/model to "Reingold" ISTA+ | dieselweasel | 12 | 669 |
25-03-2024, 08:11 AM Last Post: Node |
|
Ultimate Ediabas/ISTA+ voltage control V3 | Node | 322 | 121,506 |
24-03-2024, 23:45 PM Last Post: armenh7 |
|
BMW Vehicle Order (VO) | BMWholic | 146 | 47,122 |
19-03-2024, 08:42 AM Last Post: MODISA |
|
sos coded out? | moiloon | 4 | 301 |
05-03-2024, 08:01 AM Last Post: Node |
|
reset gps evo unit tool32 | Fx82 | 3 | 731 |
04-03-2024, 20:20 PM Last Post: Cerhio |
|
Can the dealer program a used KAFAS4? | BimmerSLO | 7 | 452 |
02-03-2024, 18:01 PM Last Post: tonemoz |
|
MGU UNIT need to repair | eprst | 8 | 1,216 |
11-02-2024, 12:29 PM Last Post: eprst |
|
Simulate inputs on the head unit MGU | anton.maier | 5 | 345 |
27-01-2024, 11:25 AM Last Post: anton.maier |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content