Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
KTAG CLONE ISUZU TRANSTRON R5F72544 CAN'T READ
09-08-2023, 21:19 PM,
Post: #1
|
|||
|
|||
KTAG CLONE ISUZU TRANSTRON R5F72544 CAN'T READ
hello.....
i try to read an ecu from Isuzu transtron with R5F72544 mcu, but my ktag clone(reworked) can't read it...... i see some guys manage to read this ecu with clone ktag, any info about it? my tool needs further rework? thanks..... |
|||
10-08-2023, 07:12 AM,
Post: #2
|
|||
|
|||
RE: KTAG CLONE ISUZU TRANSTRON R5F72544 CAN'T READ
Hello.
Do you have sticker ? Kess clone can read 4JK1. |
|||
10-08-2023, 13:30 PM,
Post: #3
|
|||
|
|||
RE: KTAG CLONE ISUZU TRANSTRON R5F72544 CAN'T READ
|
|||
10-08-2023, 16:22 PM,
Post: #4
|
|||
|
|||
RE: KTAG CLONE ISUZU TRANSTRON R5F72544 CAN'T READ
Maybe it's dead?
According to Ktag pinout, follow and check +12V and GND on PCB. |
|||
10-08-2023, 21:11 PM,
Post: #5
|
|||
|
|||
RE: KTAG CLONE ISUZU TRANSTRON R5F72544 CAN'T READ
(10-08-2023, 16:22 PM)Samsara69 Wrote: Maybe it's dead? They had read and clone this ecu by jtag bdm.... yes ecu have problem but is possible to read by jtag.... Previously I had a problem and with iaw 9df ecu..... Can someone confirm that ktag clone can read this mcu????.... |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content