[gsmgeobz]

hello, I also have a problem with the 2005 cdr radio, I wrote an eeprom file in it with the code of and it doesn't start anymore, I put his back in and it still does the same thing, it doesn't want to turn on, those who can do it, this is his file that it was before

[al70]

eeprom 24c16 ?....

---

here's a dump 24c16, pin no. 6422, you can try goodluck

[gsmgeobz]

I opened it again and found that there is a piece missing, which is those

[al70]

just try to bridge with solder, if not work, find capaitor with same olour, should be ok

---

damn c key has stopped working on my keyboard

[Shooting]

I opened it again and found that there is a piece missing, which is those

Those are just smoothing capacitors, like above said just find one the same colour and size and it will be fine......
But don't short with solder, that's not great advice.....


wbr

[liviu2004]

Start button on these tend not to play ball.
Open the front and solder button connections to pcb again.

[gsmgeobz]

Start button on these tend not to play ball.
Open the front and solder button connections to pcb again.

I also redid the button but still nothing lights up

---

I opened it again and found that there is a piece missing, which is those

Those are just smoothing capacitors, like above said just find one the same colour and size and it will be fine......
But don't short with solder, that's not great advice.....


wbr

I put a capacitor there but it doesn't want to take it at all

[liviu2004]

Soldered eeprom backwards? Picture above is not yours.

[gsmgeobz]

Soldered eeprom backwards? Picture above is not yours.

[Shooting]

Soldered eeprom backwards? Picture above is not yours.

That's really bad soldering, remove, clean then re-solder, checking rotation


wbr