ATTENTION !! Users which have not any posts were deleted !
New Emulator
Julie Emulator
Immo Bypass
AUTO-CHIPS
HEXPROG
moe diatronik
Mib2 Delphi Loop on start up
|
04-04-2021, 13:00 PM,
Post: #1
|
|||
|
|||
|
Mib2 Delphi Loop on start up
I have a problem with Mib2 Delphi.
The unit is looped during start-up. It starts 15 seconds and then reboots. How to enter Delphi in IPL mode? RX and GND short circuit does not work .... |
|||
|
![[-]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse.png)
|
04-04-2021, 14:31 PM,
Post: #2
|
|||
|
|||
|
RE: Mib2 Delphi Loop on start up
What did U exactly done with this device?
|
|||
|
|
|
04-04-2021, 19:11 PM,
Post: #3
|
|||
|
|||
|
RE: Mib2 Delphi Loop on start up
I was doing a change of US region to EU. It is possible that the patch was buggy. The unit resets every 15 seconds. I can not enter any command via telnet (information is displayed what the unit is doing and restarting)
|
|||
|
|
|
05-04-2021, 15:26 PM,
Post: #4
|
|||
|
|||
|
RE: Mib2 Delphi Loop on start up
I guess the version was 0504 before conversion?
MIB1/MIB2 - CP off + FEC activations
BMW CIC/NBT/NBTEvo - Repair + Patching + FSC Activations (19-11 Also Supported) GM Opel HMI 2.0 and HMI 2.5 - Maplock disable |
|||
|
|
|
05-04-2021, 17:13 PM,
Post: #5
|
|||
|
|||
|
RE: Mib2 Delphi Loop on start up
Short 2 Pins in mainboard Post pic from
Board |
|||
|
|
|
06-04-2021, 04:13 AM,
Post: #6
|
|||
|
|||
|
RE: Mib2 Delphi Loop on start up
You can tell exactly which and where this pin for the jumper is, because I have the same problem.
|
|||
|
|
|
06-04-2021, 20:33 PM,
(This post was last modified: 07-04-2021, 13:17 PM by Clusters.)
Post: #7
|
|||
|
|||
|
RE: Mib2 Delphi Loop on start up
There you go guys
PM (Private Message) for password, do NOT post in thread for it, it will be removed.
Thanks, Admin. |
